Looking for Charlotte Auto Show fabric lightbox LED modules? A supplier-hosted customer account describes lightbox displays for two businesses at this show. Compare independent internal sources for your own printed brand panels.
How do I compare lighting for two brands with different printed colours?
Place the actual backlit print samples under the candidate source in consistent viewing conditions. Compare logos, neutral areas and gradients for each brand; one pleasing sample does not establish the other print will look the same.
Will a high CRI value guarantee my printed logo matches its reference?
CRI is one source specification, not a guarantee of printed brand-colour matching. Fabric, ink, artwork and viewing light also affect appearance. Review the illuminated sample with the agreed reference before approving a source.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Are these modules car headlights or the supplier’s approved replacements?
These are independent sources for suitable printed lightboxes. No automotive headlamp use or fit to the supplier’s proprietary frames is claimed; verify the exact mechanical and electrical arrangement.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send both brand references, backlit print samples, frame depth and power details through Contact us to compare sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Looking for Charlotte Auto Show fabric lightbox LED modules? A supplier-hosted customer account describes lightbox displays for two businesses at this show. Compare independent internal sources for your own printed brand panels.
How do I compare lighting for two brands with different printed colours?
Place the actual backlit print samples under the candidate source in consistent viewing conditions. Compare logos, neutral areas and gradients for each brand; one pleasing sample does not establish the other print will look the same.
Will a high CRI value guarantee my printed logo matches its reference?
CRI is one source specification, not a guarantee of printed brand-colour matching. Fabric, ink, artwork and viewing light also affect appearance. Review the illuminated sample with the agreed reference before approving a source.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Are these modules car headlights or the supplier’s approved replacements?
These are independent sources for suitable printed lightboxes. No automotive headlamp use or fit to the supplier’s proprietary frames is claimed; verify the exact mechanical and electrical arrangement.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send both brand references, backlit print samples, frame depth and power details through Contact us to compare sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.