Searching for CattleCon lightbox LED modules or NCBA Trade Show LED bars for SEG backdrops and lightbox counters? Compare internal sources for the main printed wall, side displays and reception graphic as one booth set.
Can a SEG backdrop and lightbox counter use the same LED layout?
Check each frame separately. A large backdrop and smaller counter can differ in depth, internal supports and source mounting space. Compare edge-lit or rear-backlight options with each finished face rather than copying the main-wall spacing into every enclosure.
How do I compare the backdrop and smaller illuminated panels?
Test the approved graphics together under the intended display conditions. Compare pale areas, brand colours and printed interface text on each face. Resolve unwanted lighting gaps separately from artwork differences, and record the source arrangement for each enclosure.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What details should I send for a mixed-size lightbox booth?
Send a plan identifying each printed face, final graphics, separate frame dimensions and depths, supports, mounting and service access, plus branch wiring and supply details. These modules illuminate exhibit graphics; they are not livestock lighting or components for herd-management screens.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your backdrop, side-panel and counter details to compare a suitable source for each frame.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Searching for CattleCon lightbox LED modules or NCBA Trade Show LED bars for SEG backdrops and lightbox counters? Compare internal sources for the main printed wall, side displays and reception graphic as one booth set.
Can a SEG backdrop and lightbox counter use the same LED layout?
Check each frame separately. A large backdrop and smaller counter can differ in depth, internal supports and source mounting space. Compare edge-lit or rear-backlight options with each finished face rather than copying the main-wall spacing into every enclosure.
How do I compare the backdrop and smaller illuminated panels?
Test the approved graphics together under the intended display conditions. Compare pale areas, brand colours and printed interface text on each face. Resolve unwanted lighting gaps separately from artwork differences, and record the source arrangement for each enclosure.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What details should I send for a mixed-size lightbox booth?
Send a plan identifying each printed face, final graphics, separate frame dimensions and depths, supports, mounting and service access, plus branch wiring and supply details. These modules illuminate exhibit graphics; they are not livestock lighting or components for herd-management screens.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your backdrop, side-panel and counter details to compare a suitable source for each frame.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.