Looking for LED modules inside a sponsor lightbox for the ASTA Vegetable & Flower Seed Conference? This selection is for sign makers and display fabricators building or servicing authorized illuminated graphics. Compare source length, optical direction and power planning for the actual printed wrap and frame. These are internal LED components; sponsor placement, graphics and complete lightboxes are arranged separately.
Which LED bars suit wrapped sponsor lightbox graphics?
Start with a drawing of every surface that must transmit light. A front graphic, narrow side return and opaque back panel need different treatment. Confirm the illuminated opening, usable depth, mounting lengths and print material before choosing edge-lit bars or direct backlighting. The event's historical sponsor prospectus documents wrapped lightboxes; it does not specify an interchangeable LED system or the construction of your next build.
How can I reduce dark corners and visible seams?
Test the wrap on the assembled frame, including folded corners, graphic joins and support members. Aim edge-lit lenses into the intended illuminated area and check each return separately; a bar that lights the front may leave a side face dark. Compare lighter and darker printed areas under the intended ambient light. Adjust source position and spacing using this sample, rather than hiding a seam by increasing every bar's wattage.
Compare LED lightbox sources
- 20W rigid LED bar — DC24V, 470×24×16mm including lens, 2200lm ±10%, 10°×40° optics; check frame section and connector pinout.
- Linkable LED bar — DC24V; 212mm/9W, 319mm/14W or 480mm/20W; standard 20°×60° lens; verify each variant and run limit.
- 7W mini LED bar — DC24V, 200×23×16mm, 770lm, standard 20°×60° lens; verify end clearance and external driver.
Can I replace LEDs in a supplied sponsor lightbox?
Confirm who supplies and operates the lightbox before ordering. A sponsor graphic booking is not an LED replacement specification. For an authorized repair, identify the existing voltage, driver, connectors, mounting and optical arrangement; matching a plug shape does not prove compatibility. For a new fabrication, request a tested source layout for each illuminated face. Keep any required driver and service opening accessible after the wrap is installed.
Before ordering
Check the actual frame, print transmission, corner and seam result, module-to-graphic clearance, polarity and connected wattage. These featured bars require an appropriate external DC24V constant-voltage supply. Size the supply, cables and connectors for the complete load and verify the selected model's run limit. Do not use a single spacing rule or assume every product in the grid shares these specifications.
Send the illuminated face and return dimensions, depth, print material, frame drawing, supply details and required quantity. We can help compare LED options before you order a sample or production pack. Coordinate current display placement and graphics requirements with the event organizer.
Contact us · Shipping policy · Sponsor lightbox reference
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
Side-Lit LED Module for MODULAP Systems -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed -
12W Dual-CCT Switchable LED Lightbox Bar – 24V
Looking for LED modules inside a sponsor lightbox for the ASTA Vegetable & Flower Seed Conference? This selection is for sign makers and display fabricators building or servicing authorized illuminated graphics. Compare source length, optical direction and power planning for the actual printed wrap and frame. These are internal LED components; sponsor placement, graphics and complete lightboxes are arranged separately.
Which LED bars suit wrapped sponsor lightbox graphics?
Start with a drawing of every surface that must transmit light. A front graphic, narrow side return and opaque back panel need different treatment. Confirm the illuminated opening, usable depth, mounting lengths and print material before choosing edge-lit bars or direct backlighting. The event's historical sponsor prospectus documents wrapped lightboxes; it does not specify an interchangeable LED system or the construction of your next build.
How can I reduce dark corners and visible seams?
Test the wrap on the assembled frame, including folded corners, graphic joins and support members. Aim edge-lit lenses into the intended illuminated area and check each return separately; a bar that lights the front may leave a side face dark. Compare lighter and darker printed areas under the intended ambient light. Adjust source position and spacing using this sample, rather than hiding a seam by increasing every bar's wattage.
Compare LED lightbox sources
- 20W rigid LED bar — DC24V, 470×24×16mm including lens, 2200lm ±10%, 10°×40° optics; check frame section and connector pinout.
- Linkable LED bar — DC24V; 212mm/9W, 319mm/14W or 480mm/20W; standard 20°×60° lens; verify each variant and run limit.
- 7W mini LED bar — DC24V, 200×23×16mm, 770lm, standard 20°×60° lens; verify end clearance and external driver.
Can I replace LEDs in a supplied sponsor lightbox?
Confirm who supplies and operates the lightbox before ordering. A sponsor graphic booking is not an LED replacement specification. For an authorized repair, identify the existing voltage, driver, connectors, mounting and optical arrangement; matching a plug shape does not prove compatibility. For a new fabrication, request a tested source layout for each illuminated face. Keep any required driver and service opening accessible after the wrap is installed.
Before ordering
Check the actual frame, print transmission, corner and seam result, module-to-graphic clearance, polarity and connected wattage. These featured bars require an appropriate external DC24V constant-voltage supply. Size the supply, cables and connectors for the complete load and verify the selected model's run limit. Do not use a single spacing rule or assume every product in the grid shares these specifications.
Send the illuminated face and return dimensions, depth, print material, frame drawing, supply details and required quantity. We can help compare LED options before you order a sample or production pack. Coordinate current display placement and graphics requirements with the event organizer.
Contact us · Shipping policy · Sponsor lightbox reference
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.