Looking for Alimentaria lightbox LED modules or LED bars for backlit food-exhibition walls? Compare internal sources for compatible indoor rear-wall graphic lightboxes, separately from food displays and bar lighting.
Which LED modules suit large rear-wall graphic lightboxes?
Compare edge lighting and rear backlighting using the actual graphic, lit dimensions, usable depth and mounting spans. Check source length, optics and print distance; a large wall alone does not identify the correct source layout or face material.
How do I check lighting across a large printed panel?
Test the complete printed face at planned hall-light conditions and viewing distances. Inspect edges, joins, dark backgrounds and fine product-image details for bright spots or shadows before fixing source positions. Small unprinted samples cannot approve the full image.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What access and frame information should I send?
Send full print samples, lit dimensions, usable depth, mounting spans, rear service openings, connector photos and supply voltage. Confirm wiring and access before closing the wall. Refrigerated cabinets, food preparation, cleaning and moisture conditions need separate suitability checks.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all LED Modules below. Send your full rear-wall graphic and frame details to choose compatible internal sources before ordering.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Looking for Alimentaria lightbox LED modules or LED bars for backlit food-exhibition walls? Compare internal sources for compatible indoor rear-wall graphic lightboxes, separately from food displays and bar lighting.
Which LED modules suit large rear-wall graphic lightboxes?
Compare edge lighting and rear backlighting using the actual graphic, lit dimensions, usable depth and mounting spans. Check source length, optics and print distance; a large wall alone does not identify the correct source layout or face material.
How do I check lighting across a large printed panel?
Test the complete printed face at planned hall-light conditions and viewing distances. Inspect edges, joins, dark backgrounds and fine product-image details for bright spots or shadows before fixing source positions. Small unprinted samples cannot approve the full image.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What access and frame information should I send?
Send full print samples, lit dimensions, usable depth, mounting spans, rear service openings, connector photos and supply voltage. Confirm wiring and access before closing the wall. Refrigerated cabinets, food preparation, cleaning and moisture conditions need separate suitability checks.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all LED Modules below. Send your full rear-wall graphic and frame details to choose compatible internal sources before ordering.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.