Building an independently designed graphic lightbox behind turbine specimens at the 7F Users Group Vendor Fair? Compare all 26 LED Modules products for its internal light source. Test the printed message with the real sample display in place.
Review the graphic behind the turbine sample
Position the sample, table and lightbox as they will be displayed. Mark which text or diagram is hidden by the specimen from the visitor's standing and seated positions. Compare LED layouts using the same print and frame; moving a sample does not correct an unevenly lit graphic.
Check metal reflections without changing the message
View polished and machined surfaces with the lightbox and surrounding stand lights switched on. Record distracting reflections and any labels that become hard to read. Try sample orientation or graphic placement changes separately, then repeat the review. Support heavy specimens independently; LED bars and a fabric lightbox are not load-bearing mounts for turbine parts.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Do these modules illuminate a working turbine?
No. This selection concerns the internal light source of an indoor exhibition graphic lightbox. Turbine operating environments, inspection tasks and sample-support structures require their own equipment and assessment.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the frame section, printable area, sample-display layout, viewing positions and electrical details when requesting an LED module comparison.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Building an independently designed graphic lightbox behind turbine specimens at the 7F Users Group Vendor Fair? Compare all 26 LED Modules products for its internal light source. Test the printed message with the real sample display in place.
Review the graphic behind the turbine sample
Position the sample, table and lightbox as they will be displayed. Mark which text or diagram is hidden by the specimen from the visitor's standing and seated positions. Compare LED layouts using the same print and frame; moving a sample does not correct an unevenly lit graphic.
Check metal reflections without changing the message
View polished and machined surfaces with the lightbox and surrounding stand lights switched on. Record distracting reflections and any labels that become hard to read. Try sample orientation or graphic placement changes separately, then repeat the review. Support heavy specimens independently; LED bars and a fabric lightbox are not load-bearing mounts for turbine parts.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Do these modules illuminate a working turbine?
No. This selection concerns the internal light source of an indoor exhibition graphic lightbox. Turbine operating environments, inspection tasks and sample-support structures require their own equipment and assessment.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the frame section, printable area, sample-display layout, viewing positions and electrical details when requesting an LED module comparison.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.