Searching for WSWA Access LIVE lightbox LED modules or LED bars for illuminated sampling counters? Compare internal sources for printed counter faces and beverage-exhibition backwalls.
Which LEDs suit sampling counters and backwalls?
Compare sources using each printed face, usable frame depth and mounting space. A counter and backwall can need different layouts; assess edge-lit and rear-backlight options without assuming the same arrangement fits both.
How do I test a counter graphic at close viewing distances?
Illuminate the actual print in the planned counter frame. Check logo and small-text readability from tasting positions and aisle approaches, including bright areas and dark edges. Also compare the backwall at its intended viewing distance.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What print and mounting details should I send?
Send face samples, counter and backwall frame sections, usable depths, mounting spans, source layouts, viewing positions, connectors and supply. Verify system compatibility and keep sources within their rated environment; these are graphic-lighting components, not bottle-content lights.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your sampling-counter and backwall details to compare suitable sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Searching for WSWA Access LIVE lightbox LED modules or LED bars for illuminated sampling counters? Compare internal sources for printed counter faces and beverage-exhibition backwalls.
Which LEDs suit sampling counters and backwalls?
Compare sources using each printed face, usable frame depth and mounting space. A counter and backwall can need different layouts; assess edge-lit and rear-backlight options without assuming the same arrangement fits both.
How do I test a counter graphic at close viewing distances?
Illuminate the actual print in the planned counter frame. Check logo and small-text readability from tasting positions and aisle approaches, including bright areas and dark edges. Also compare the backwall at its intended viewing distance.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What print and mounting details should I send?
Send face samples, counter and backwall frame sections, usable depths, mounting spans, source layouts, viewing positions, connectors and supply. Verify system compatibility and keep sources within their rated environment; these are graphic-lighting components, not bottle-content lights.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your sampling-counter and backwall details to compare suitable sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.