Looking for ToxExpo lightbox LED modules for the SOT Annual Meeting? Compare internal LED bars for double-sided graphic lightboxes beside demonstration kiosks.
Which LED bars suit a double-sided kiosk lightbox?
Compare edge lighting and rear backlighting using both lit faces, clear depth and the frame cross-section. Locate kiosk fixings separately so they do not obstruct the planned light path or LED access.
Can both faces use the same LED arrangement?
Do not assume they will illuminate equally. Different prints, clearances or obstructions can change the result. Test each final printed face and check whether the proposed arrangement serves both sides uniformly.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What drawings and electrical details should I send?
Send both print samples, lit dimensions, the frame cross-section, kiosk fixing drawings and connector and power labels. Keep LED service access available and calculate the selected circuit load.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all LED Modules below. Send details of both lightbox faces and the kiosk fixings to review a suitable internal LED source.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Looking for ToxExpo lightbox LED modules for the SOT Annual Meeting? Compare internal LED bars for double-sided graphic lightboxes beside demonstration kiosks.
Which LED bars suit a double-sided kiosk lightbox?
Compare edge lighting and rear backlighting using both lit faces, clear depth and the frame cross-section. Locate kiosk fixings separately so they do not obstruct the planned light path or LED access.
Can both faces use the same LED arrangement?
Do not assume they will illuminate equally. Different prints, clearances or obstructions can change the result. Test each final printed face and check whether the proposed arrangement serves both sides uniformly.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What drawings and electrical details should I send?
Send both print samples, lit dimensions, the frame cross-section, kiosk fixing drawings and connector and power labels. Keep LED service access available and calculate the selected circuit load.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all LED Modules below. Send details of both lightbox faces and the kiosk fixings to review a suitable internal LED source.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.