Looking for Taste of London lightbox LED modules or LED bars for a drinks-tasting stand? Compare internal sources for illuminated beverage brand graphics in a verified protected dry enclosure.
Which LEDs suit a drinks-stand brand lightbox?
Match source dimensions and optics to the actual printed face, usable depth and mounting spans. The featured 20W model is IP20 for indoor use; do not use it exposed to weather. Confirm enclosure and model limits before selection.
How does the printed graphic look in shade and evening?
Test your real graphic under the intended daylight, shade and evening conditions. Compare uniformity, colour and readability from visitor positions; more source output alone does not guarantee visibility in sunlight.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What enclosure, frame and power details should I send?
Send print samples, ambient conditions, rain and condensation protection, frame depths, mounting spans, connector access and supply. Verify the complete enclosure and each model’s environmental and wiring limits. An individual LED rating does not certify an outdoor assembly.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your graphic and enclosure details to compare suitable sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Looking for Taste of London lightbox LED modules or LED bars for a drinks-tasting stand? Compare internal sources for illuminated beverage brand graphics in a verified protected dry enclosure.
Which LEDs suit a drinks-stand brand lightbox?
Match source dimensions and optics to the actual printed face, usable depth and mounting spans. The featured 20W model is IP20 for indoor use; do not use it exposed to weather. Confirm enclosure and model limits before selection.
How does the printed graphic look in shade and evening?
Test your real graphic under the intended daylight, shade and evening conditions. Compare uniformity, colour and readability from visitor positions; more source output alone does not guarantee visibility in sunlight.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What enclosure, frame and power details should I send?
Send print samples, ambient conditions, rain and condensation protection, frame depths, mounting spans, connector access and supply. Verify the complete enclosure and each model’s environmental and wiring limits. An individual LED rating does not certify an outdoor assembly.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your graphic and enclosure details to compare suitable sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.