Looking for SPS exhibition lightbox LEDs? The organizer’s advertising portfolio includes backlit printed fabric. Compare independent modules for your own indoor sign; these are internal light sources for a physical graphic.
Do I need lightbox LED modules or LED video panels?
A printed lightbox needs light behind its graphic. A video display needs image-producing panels and compatible electronics. Decide whether the message is a physical print or video before specifying the system.
What should I specify for an illuminated fabric sign?
Provide illuminated width, height, depth and the actual printed fabric. Compare edge or rear lighting, bar placement and supply requirements in an assembled sample before ordering.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Can these modules replace LEDs in SPS venue advertising fixtures?
No replacement fit is claimed. Organizer-owned fixtures are separate from your own build; consult their operator about any proposed changes.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your frame section, fabric sample and intended light direction through Contact us to compare suitable sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Looking for SPS exhibition lightbox LEDs? The organizer’s advertising portfolio includes backlit printed fabric. Compare independent modules for your own indoor sign; these are internal light sources for a physical graphic.
Do I need lightbox LED modules or LED video panels?
A printed lightbox needs light behind its graphic. A video display needs image-producing panels and compatible electronics. Decide whether the message is a physical print or video before specifying the system.
What should I specify for an illuminated fabric sign?
Provide illuminated width, height, depth and the actual printed fabric. Compare edge or rear lighting, bar placement and supply requirements in an assembled sample before ordering.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Can these modules replace LEDs in SPS venue advertising fixtures?
No replacement fit is claimed. Organizer-owned fixtures are separate from your own build; consult their operator about any proposed changes.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your frame section, fabric sample and intended light direction through Contact us to compare suitable sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.