SHOP! MarketPlace connects retail design professionals with fixture, display and lighting suppliers. Select internal LED sources for a photographed retail lightbox mockup, and review the physical assembly alongside its images. Browse all LED Modules below.
Keep the photographic comparison repeatable
Use the same printed graphic, frame and camera position when comparing sources. Record exposure and white balance instead of allowing automatic settings to conceal differences. Check clipping, reflections and bright areas on the image, then inspect the lightbox directly in its intended surroundings.
Record the light setting with the approved image
Label each photograph with the module model, layout and selected white-light channel. The dual-CCT bar is direct backlighting and requires separate compatible control. Retake comparison images after changing the graphic or lighting. Camera banding alone is not a flicker measurement.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Can a good photograph approve a lightbox for production?
No. Camera exposure, processing and the viewing screen can alter the result. Use photographs as review records, and approve the actual assembled display under the intended viewing conditions.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the mockup images, camera settings, printed material, frame depth, approved light setting and quantity through our contact page for component selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
SHOP! MarketPlace connects retail design professionals with fixture, display and lighting suppliers. Select internal LED sources for a photographed retail lightbox mockup, and review the physical assembly alongside its images. Browse all LED Modules below.
Keep the photographic comparison repeatable
Use the same printed graphic, frame and camera position when comparing sources. Record exposure and white balance instead of allowing automatic settings to conceal differences. Check clipping, reflections and bright areas on the image, then inspect the lightbox directly in its intended surroundings.
Record the light setting with the approved image
Label each photograph with the module model, layout and selected white-light channel. The dual-CCT bar is direct backlighting and requires separate compatible control. Retake comparison images after changing the graphic or lighting. Camera banding alone is not a flicker measurement.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Can a good photograph approve a lightbox for production?
No. Camera exposure, processing and the viewing screen can alter the result. Use photographs as review records, and approve the actual assembled display under the intended viewing conditions.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the mockup images, camera settings, printed material, frame depth, approved light setting and quantity through our contact page for component selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.