Looking for RSAC or RSA Conference lightbox LED modules? Compare internal LED bars for indoor brand graphics separately from accent strips in neighbouring product cabinets.
Can cabinet accent strips backlight a brand graphic?
Not automatically. A narrow accent strip and a broad graphic face have different lighting tasks. Compare edge-lit or rear-backlight optics with the actual print, lit size, clear depth and mounts; test the complete graphic before ordering.
Can the lightbox and cabinets share a power supply?
Only after checking each circuit’s voltage, total load, connector, polarity and control requirements. Draw separate branch loads and service points. Do not infer electrical compatibility because both lighting systems are in the same stand.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What graphic and cabinet-circuit details should I send?
Send the final print, lightbox dimensions, clear depth, mounting spans, separate cabinet and graphic load schedules, connectors and supply labels. Identify each lighting task; these modules are internal graphic sources, not a complete cabinet lighting kit.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all LED Modules below. Send the graphic specification and circuit drawing to review suitable sources and supply requirements.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Looking for RSAC or RSA Conference lightbox LED modules? Compare internal LED bars for indoor brand graphics separately from accent strips in neighbouring product cabinets.
Can cabinet accent strips backlight a brand graphic?
Not automatically. A narrow accent strip and a broad graphic face have different lighting tasks. Compare edge-lit or rear-backlight optics with the actual print, lit size, clear depth and mounts; test the complete graphic before ordering.
Can the lightbox and cabinets share a power supply?
Only after checking each circuit’s voltage, total load, connector, polarity and control requirements. Draw separate branch loads and service points. Do not infer electrical compatibility because both lighting systems are in the same stand.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What graphic and cabinet-circuit details should I send?
Send the final print, lightbox dimensions, clear depth, mounting spans, separate cabinet and graphic load schedules, connectors and supply labels. Identify each lighting task; these modules are internal graphic sources, not a complete cabinet lighting kit.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all LED Modules below. Send the graphic specification and circuit drawing to review suitable sources and supply requirements.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.