Researching retail display lighting at RetailTech JAPAN? This collection helps sign builders specify internal LED modules for a separately designed printed lightbox. A retail lighting catalogue can include both mains-powered modules and low-voltage systems; the module input must be identified before ordering.
Start with the module input, not the wall socket
Record the input printed on the proposed module and the output of its dedicated power supply. The DC24V bars featured below need a matching DC supply; a Japanese AC100V site supply is not the module input. Have the installer approve the complete electrical design.
Compare LED Modules for your test frame
- DC24V linkable edge-lit bars: 212mm/9W, 319mm/14W or 480mm/20W for modular lightbox builds.
- 12W/18W DC24V MODULAP lightbox module: 470mm edge-lighting format for compatible fabric frames; verify the connector and fit.
- 20W DC24V rigid lightbox bar: 470mm, 2200lm ±10%, for tested indoor SEG and illuminated-sign layouts.
- 7W DC24V compact lightbox bar: 200mm, 770lm, 200×23×16mm body for short frame sections. Check the Molex 5557 / Mini-Fit Jr. connector family, mating pinout and fit before replacement.
Can I replace an AC100V sign module with a DC24V bar?
Do not treat them as interchangeable. A DC24V assembly needs its own suitable supply, wiring and protection. Identify the existing system before considering a separately engineered replacement.
Does a similar connector prove compatibility?
No. Confirm polarity, pin assignment and current capacity as well as physical fit. Record the selected module, supply and approved mating connector together in the purchasing specification.
What should the store maintenance team receive?
Provide the approved wiring drawing, component labels and access location for the supply. Test the actual printed face in the proposed frame, and keep a reference sample before ordering repeat store sets.
Before ordering
LED Modules illuminate a printed face inside a lightbox; they are not complete signs. Confirm connector polarity, driver capacity, thermal conditions and connection limits. Check the selected bar length and product pack quantity. Do not assume outdoor or moisture suitability from a retrofit application.
Send cabinet photos, internal dimensions, frame drawings, the existing driver specification and proposed product links through our contact page to discuss a trial selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Researching retail display lighting at RetailTech JAPAN? This collection helps sign builders specify internal LED modules for a separately designed printed lightbox. A retail lighting catalogue can include both mains-powered modules and low-voltage systems; the module input must be identified before ordering.
Start with the module input, not the wall socket
Record the input printed on the proposed module and the output of its dedicated power supply. The DC24V bars featured below need a matching DC supply; a Japanese AC100V site supply is not the module input. Have the installer approve the complete electrical design.
Compare LED Modules for your test frame
- DC24V linkable edge-lit bars: 212mm/9W, 319mm/14W or 480mm/20W for modular lightbox builds.
- 12W/18W DC24V MODULAP lightbox module: 470mm edge-lighting format for compatible fabric frames; verify the connector and fit.
- 20W DC24V rigid lightbox bar: 470mm, 2200lm ±10%, for tested indoor SEG and illuminated-sign layouts.
- 7W DC24V compact lightbox bar: 200mm, 770lm, 200×23×16mm body for short frame sections. Check the Molex 5557 / Mini-Fit Jr. connector family, mating pinout and fit before replacement.
Can I replace an AC100V sign module with a DC24V bar?
Do not treat them as interchangeable. A DC24V assembly needs its own suitable supply, wiring and protection. Identify the existing system before considering a separately engineered replacement.
Does a similar connector prove compatibility?
No. Confirm polarity, pin assignment and current capacity as well as physical fit. Record the selected module, supply and approved mating connector together in the purchasing specification.
What should the store maintenance team receive?
Provide the approved wiring drawing, component labels and access location for the supply. Test the actual printed face in the proposed frame, and keep a reference sample before ordering repeat store sets.
Before ordering
LED Modules illuminate a printed face inside a lightbox; they are not complete signs. Confirm connector polarity, driver capacity, thermal conditions and connection limits. Check the selected bar length and product pack quantity. Do not assume outdoor or moisture suitability from a retrofit application.
Send cabinet photos, internal dimensions, frame drawings, the existing driver specification and proposed product links through our contact page to discuss a trial selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.