Searching for PPAI Expo lightbox LED modules? Compare sources for your own promotional brand graphics on a narrow illuminated tower and a wider printed lightbox wall.
Can tower and wall lightboxes share one LED layout?
Measure each box separately. Width, usable depth, print material and source direction can differ. Compare side-lit and rear-backlight options rather than copying the same bar quantity into both boxes.
How do I compare the same brand artwork across boxes?
Test both actual printed faces under their planned lighting at the same time. Compare pale areas, fine logo details and overall brightness from the intended viewing positions. Equal wattage or CRI does not guarantee a visual colour match.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What should I send for a multi-lightbox enquiry?
Send a labelled tower-and-wall drawing with dimensions, materials, brand-artwork samples and supply details for each box. Verify mounting and wiring separately; no compatibility with the case-study frames is claimed.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Contact us with the labelled tower-and-wall plan and matching artwork samples to compare LED source options.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Searching for PPAI Expo lightbox LED modules? Compare sources for your own promotional brand graphics on a narrow illuminated tower and a wider printed lightbox wall.
Can tower and wall lightboxes share one LED layout?
Measure each box separately. Width, usable depth, print material and source direction can differ. Compare side-lit and rear-backlight options rather than copying the same bar quantity into both boxes.
How do I compare the same brand artwork across boxes?
Test both actual printed faces under their planned lighting at the same time. Compare pale areas, fine logo details and overall brightness from the intended viewing positions. Equal wattage or CRI does not guarantee a visual colour match.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What should I send for a multi-lightbox enquiry?
Send a labelled tower-and-wall drawing with dimensions, materials, brand-artwork samples and supply details for each box. Verify mounting and wiring separately; no compatibility with the case-study frames is claimed.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Contact us with the labelled tower-and-wall plan and matching artwork samples to compare LED source options.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.