Searching for Potato Expo lightbox LED modules or LED bars for food-product exhibition graphics? Compare internal sources for printed display lightboxes.
Which LEDs suit printed food-product lightboxes?
Match source dimensions and optics to the printed face, usable frame depth and mounting space. Compare edge-lit and rear-backlight options in the actual frame.
How do I compare the appearance of the food image?
Test actual printed samples with the intended light source and viewing conditions. Check image detail and colour appearance across the lit face. Source CRI or CCT alone cannot guarantee the colours of a printed graphic.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What print and frame details should I send?
Send printed image samples and face material, frame sections and usable depth, source layout, mounting spans, connectors and supply. Verify system fit. These sources light display graphics, not refrigerated food cases.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your print samples and frame details to compare suitable sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Searching for Potato Expo lightbox LED modules or LED bars for food-product exhibition graphics? Compare internal sources for printed display lightboxes.
Which LEDs suit printed food-product lightboxes?
Match source dimensions and optics to the printed face, usable frame depth and mounting space. Compare edge-lit and rear-backlight options in the actual frame.
How do I compare the appearance of the food image?
Test actual printed samples with the intended light source and viewing conditions. Check image detail and colour appearance across the lit face. Source CRI or CCT alone cannot guarantee the colours of a printed graphic.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What print and frame details should I send?
Send printed image samples and face material, frame sections and usable depth, source layout, mounting spans, connectors and supply. Verify system fit. These sources light display graphics, not refrigerated food cases.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your print samples and frame details to compare suitable sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.