Choosing LED modules for an O-SHOW optical exhibition lightbox? Plan internal lighting for a fabric wall that can form a corner or stand separately. Compare LED bars around each wall's printed faces and usable frame space.
Can I split an L-shaped lightbox into separately lit walls?
Treat each wall as a separate lighting plan. Record its LED layout, supply, cable route and connector pinout before separating it. Recalculate the connected load for the chosen configuration; disconnect unused branches only as the system maker instructs. Test each wall independently before joining the corner.
What changes when a lightbox has one lit face instead of two?
A blockout back and a second transmitting print create different optical conditions. Test the actual front, rear and frame supports for bright edges, dark centres and corner shadows. Compare edge-lit bars with rear backlighting; keep the same chosen white tone across adjacent walls. Two lit faces do not automatically require twice the bars.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Are these a complete O-SHOW stand or universal replacement kit?
These are internal LED components, not the frame, fabric print or external arm lights. A modular stand brand does not establish fit. Check mounting, depth, connector wiring and power with the owner before replacing existing lights.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send both wall dimensions and frame sections, each lit-face/blockout arrangement and the supply labels. Ask for a sample layout for the corner and separate-wall configurations before ordering a repeat build.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Choosing LED modules for an O-SHOW optical exhibition lightbox? Plan internal lighting for a fabric wall that can form a corner or stand separately. Compare LED bars around each wall's printed faces and usable frame space.
Can I split an L-shaped lightbox into separately lit walls?
Treat each wall as a separate lighting plan. Record its LED layout, supply, cable route and connector pinout before separating it. Recalculate the connected load for the chosen configuration; disconnect unused branches only as the system maker instructs. Test each wall independently before joining the corner.
What changes when a lightbox has one lit face instead of two?
A blockout back and a second transmitting print create different optical conditions. Test the actual front, rear and frame supports for bright edges, dark centres and corner shadows. Compare edge-lit bars with rear backlighting; keep the same chosen white tone across adjacent walls. Two lit faces do not automatically require twice the bars.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Are these a complete O-SHOW stand or universal replacement kit?
These are internal LED components, not the frame, fabric print or external arm lights. A modular stand brand does not establish fit. Check mounting, depth, connector wiring and power with the owner before replacing existing lights.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send both wall dimensions and frame sections, each lit-face/blockout arrangement and the supply labels. Ask for a sample layout for the corner and separate-wall configurations before ordering a repeat build.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.