Planning a Novodek office visit to explore fabric lightboxes? Its website invites production introductions. Compare independent LED modules for your own joined-panel design; arrange the visit with Novodek directly.
Does joining two lightbox frames create one lighting chamber?
Not necessarily. Each frame may retain its own internal walls and lighting. Ask for a section through the join and compare the illuminated area with the graphic seam before choosing a layout.
Can changing LED bars remove a dark line at the panel join?
A frame divider or graphic seam may block light. Check the assembled join with the actual fabric first. Assess frame geometry, bar placement and optics together; extra wattage alone does not establish a remedy.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Are these approved replacement LEDs for Novodek or SEGO frames?
No approved fit is claimed. Use the selected model’s mechanical, optical and electrical specifications to assess your own build; consult the frame supplier before changing its complete system.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send a section through your panel join, fabric details and proposed wiring through Contact us to compare independent sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Planning a Novodek office visit to explore fabric lightboxes? Its website invites production introductions. Compare independent LED modules for your own joined-panel design; arrange the visit with Novodek directly.
Does joining two lightbox frames create one lighting chamber?
Not necessarily. Each frame may retain its own internal walls and lighting. Ask for a section through the join and compare the illuminated area with the graphic seam before choosing a layout.
Can changing LED bars remove a dark line at the panel join?
A frame divider or graphic seam may block light. Check the assembled join with the actual fabric first. Assess frame geometry, bar placement and optics together; extra wattage alone does not establish a remedy.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Are these approved replacement LEDs for Novodek or SEGO frames?
No approved fit is claimed. Use the selected model’s mechanical, optical and electrical specifications to assess your own build; consult the frame supplier before changing its complete system.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send a section through your panel join, fabric details and proposed wiring through Contact us to compare independent sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.