Looking for Montreal Auto Show LED modules for a multi-face fabric lightbox? A builder documents fabric lightbox towers at this show. Compare components for your own printed display, checking each illuminated face separately.
Can the same LED layout illuminate every face of my lightbox?
Do not assume that it can. Map each printed face, source direction and any internal partition. A frame member or another face can alter the usable light path; assess uniformity on every face under the intended viewing conditions.
Can several lightbox faces share one power supply?
Only after checking each selected product’s voltage, combined load, supply capacity, wiring and permitted connections. Equal-looking faces may need different source layouts. Do not extend a bar chain beyond its product-specific limit; plan separate circuits where required.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Will identical modules make different printed faces look the same?
Identical sources do not guarantee matching appearance. Print material, artwork and source-to-face distance also affect the result. Compare the actual illuminated faces and approve the arrangement before fixing the order quantity.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send each face’s dimensions and artwork, frame section, partition plan and intended power supply through Contact us to compare suitable sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Looking for Montreal Auto Show LED modules for a multi-face fabric lightbox? A builder documents fabric lightbox towers at this show. Compare components for your own printed display, checking each illuminated face separately.
Can the same LED layout illuminate every face of my lightbox?
Do not assume that it can. Map each printed face, source direction and any internal partition. A frame member or another face can alter the usable light path; assess uniformity on every face under the intended viewing conditions.
Can several lightbox faces share one power supply?
Only after checking each selected product’s voltage, combined load, supply capacity, wiring and permitted connections. Equal-looking faces may need different source layouts. Do not extend a bar chain beyond its product-specific limit; plan separate circuits where required.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Will identical modules make different printed faces look the same?
Identical sources do not guarantee matching appearance. Print material, artwork and source-to-face distance also affect the result. Compare the actual illuminated faces and approve the arrangement before fixing the order quantity.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send each face’s dimensions and artwork, frame section, partition plan and intended power supply through Contact us to compare suitable sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.