Comparing reusable SEG lightboxes during a Modular Exhibits showroom visit in Canada? The supplier offers appointment visits and replaceable backlit fabric graphics. Explore independent LED modules here for your own build or verified modification.
Do I need new LEDs when replacing a lightbox fabric graphic?
Not automatically. Test the replacement print with the existing light source first. Compare the intended fabric, print process and finished illuminated appearance before deciding whether lighting changes are needed.
What should I record before changing LEDs in a reusable SEG frame?
Record the existing bar model, positions, connectors, supply and mounting space. Keep an accepted graphic sample for comparison. A different bar must be assessed with the assembled frame and new print.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Are these modules direct replacements for Modular Exhibits lightbox LEDs?
No direct fit is claimed. Verify mechanical, optical and electrical requirements before modifying a supplier’s complete display.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send the frame drawing, existing lighting details and old and new graphic references through Contact us to discuss candidates.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Comparing reusable SEG lightboxes during a Modular Exhibits showroom visit in Canada? The supplier offers appointment visits and replaceable backlit fabric graphics. Explore independent LED modules here for your own build or verified modification.
Do I need new LEDs when replacing a lightbox fabric graphic?
Not automatically. Test the replacement print with the existing light source first. Compare the intended fabric, print process and finished illuminated appearance before deciding whether lighting changes are needed.
What should I record before changing LEDs in a reusable SEG frame?
Record the existing bar model, positions, connectors, supply and mounting space. Keep an accepted graphic sample for comparison. A different bar must be assessed with the assembled frame and new print.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Are these modules direct replacements for Modular Exhibits lightbox LEDs?
No direct fit is claimed. Verify mechanical, optical and electrical requirements before modifying a supplier’s complete display.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send the frame drawing, existing lighting details and old and new graphic references through Contact us to discuss candidates.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.