Searching for MIPIM lightbox LED modules or backlighting for city skyline stand graphics? Compare internal sources for wide printed panoramas behind a property-investment reception counter.
Which LEDs suit panoramic city lightboxes?
Compare edge-lit and rear-backlight layouts with the full-width print and actual cavity depth. Check both distant skyline detail and large pale sky areas.
How can wide graphics avoid light bands?
Test the assembled lightbox across its full width. Review source spacing, partitions and print tension with the builder; increasing output alone will not remove shadows or reveal fine building detail.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What panorama and counter details should I send?
Send finished artwork, face dimensions and material, cavity sections, internal supports, counter clearances and supply details. Keep access to sources and wiring available behind the counter.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your panoramic print and lightbox sections to compare suitable internal sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Searching for MIPIM lightbox LED modules or backlighting for city skyline stand graphics? Compare internal sources for wide printed panoramas behind a property-investment reception counter.
Which LEDs suit panoramic city lightboxes?
Compare edge-lit and rear-backlight layouts with the full-width print and actual cavity depth. Check both distant skyline detail and large pale sky areas.
How can wide graphics avoid light bands?
Test the assembled lightbox across its full width. Review source spacing, partitions and print tension with the builder; increasing output alone will not remove shadows or reveal fine building detail.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What panorama and counter details should I send?
Send finished artwork, face dimensions and material, cavity sections, internal supports, counter clearances and supply details. Keep access to sources and wiring available behind the counter.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your panoramic print and lightbox sections to compare suitable internal sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.