Looking for Lunch Show lightbox LED modules or LED bars for printed food exhibition graphics? Compare internal light sources for lightboxes beside live cooking demos.
Which LEDs suit printed lightboxes beside a cooking demo?
Match source dimensions and optics to the actual print, usable frame depth and mounting spans. Test edge-lit and rear-backlight layouts in a sample frame.
How should lighting cables run near oven and sink services?
Plan lighting cables separately from appliance power and water or waste lines under a platform. Keep connections accessible and protected from actual heat and spill exposure.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What lightbox and service-layout details should I send?
Send print samples, frame depth, mounting spans, oven and sink positions, platform service routes, connectors and lighting supply. Check enclosure and installation suitability. No washdown, food-contact or appliance approval is implied.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your lightbox and service layout to compare suitable sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Looking for Lunch Show lightbox LED modules or LED bars for printed food exhibition graphics? Compare internal light sources for lightboxes beside live cooking demos.
Which LEDs suit printed lightboxes beside a cooking demo?
Match source dimensions and optics to the actual print, usable frame depth and mounting spans. Test edge-lit and rear-backlight layouts in a sample frame.
How should lighting cables run near oven and sink services?
Plan lighting cables separately from appliance power and water or waste lines under a platform. Keep connections accessible and protected from actual heat and spill exposure.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What lightbox and service-layout details should I send?
Send print samples, frame depth, mounting spans, oven and sink positions, platform service routes, connectors and lighting supply. Check enclosure and installation suitability. No washdown, food-contact or appliance approval is implied.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your lightbox and service layout to compare suitable sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.