Looking for London Tech Week lightbox LED bars? A display supplier documents printed-fabric lightboxes for a tech exhibitor. Compare internal light sources for your own frame, with space for both optics and cabling.
Will the LED bar and its cable fit inside my lightbox frame?
Measure the clear internal section, not just the outside frame size. Allow space for the lens, fixing points, connectors and cable exit. Check that the printed face can close without pinching wires.
What details help me choose LED modules for a reusable exhibition lightbox?
Provide a frame section, illuminated dimensions, printed-face material and connector photos. Compare edge or rear lighting and access to wiring; test the proposed layout before a production order.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Can I order from the frame dimensions alone?
Dimensions alone do not prove electrical or mechanical compatibility. Confirm the selected model’s supply, polarity, connectors, fixing method and light direction against the complete design.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your frame section and cable-exit photos through Contact us to compare suitable bars for your own lightbox.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Looking for London Tech Week lightbox LED bars? A display supplier documents printed-fabric lightboxes for a tech exhibitor. Compare internal light sources for your own frame, with space for both optics and cabling.
Will the LED bar and its cable fit inside my lightbox frame?
Measure the clear internal section, not just the outside frame size. Allow space for the lens, fixing points, connectors and cable exit. Check that the printed face can close without pinching wires.
What details help me choose LED modules for a reusable exhibition lightbox?
Provide a frame section, illuminated dimensions, printed-face material and connector photos. Compare edge or rear lighting and access to wiring; test the proposed layout before a production order.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Can I order from the frame dimensions alone?
Dimensions alone do not prove electrical or mechanical compatibility. Confirm the selected model’s supply, polarity, connectors, fixing method and light direction against the complete design.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your frame section and cable-exit photos through Contact us to compare suitable bars for your own lightbox.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.