Looking for London Build exhibition lightbox LEDs? A rental supplier documents modular LED lightboxes at the show and describes printed-fabric backlighting. Compare independent modules for your own indoor construction.
Can I replace the LED bars in a rented exhibition lightbox?
Ask the owner before any modification. Request its service instructions and approved parts. A hired complete display does not establish permission or compatibility for installing independently purchased LED bars.
When should I buy separate LEDs instead of hiring a lightbox?
When you are specifying and owning the construction. Compare the frame, printed face, internal lighting, supply and installation work with the rental’s included services before deciding.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Are these LEDs approved replacements for the rental supplier’s modules?
No. Compare the selected model’s optical, mechanical and electrical requirements with your own design. No supplier approval or direct fit is claimed.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send frame ownership, dimensions, printed-face material and the proposed LED layout through Contact us to discuss candidates.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Looking for London Build exhibition lightbox LEDs? A rental supplier documents modular LED lightboxes at the show and describes printed-fabric backlighting. Compare independent modules for your own indoor construction.
Can I replace the LED bars in a rented exhibition lightbox?
Ask the owner before any modification. Request its service instructions and approved parts. A hired complete display does not establish permission or compatibility for installing independently purchased LED bars.
When should I buy separate LEDs instead of hiring a lightbox?
When you are specifying and owning the construction. Compare the frame, printed face, internal lighting, supply and installation work with the rental’s included services before deciding.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Are these LEDs approved replacements for the rental supplier’s modules?
No. Compare the selected model’s optical, mechanical and electrical requirements with your own design. No supplier approval or direct fit is claimed.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send frame ownership, dimensions, printed-face material and the proposed LED layout through Contact us to discuss candidates.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.