Looking for Licensing Expo lightbox LED modules or LED bars for licensed-art graphics? Compare internal sources for printed lightboxes in booths that also use video displays.
Which LEDs suit printed artwork lightboxes?
Match source dimensions and optics to the actual printed face, usable frame depth and mounting space. Compare edge-lit and rear-backlight options for the measured frame.
How do I check print visibility beside moving screen content?
Test the illuminated print in its planned position with representative screen content. Check logo, text and artwork visibility from intended viewing distances. Source CCT or lumens alone cannot establish visual balance with a video screen.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What artwork and viewing-layout details should I send?
Send print samples, frame sections and usable depth, source layout, mounting spans, viewing distances, nearby screen positions, connectors and supply. Verify system compatibility. These sources light printed graphics, not LED video pixels.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your artwork and mixed-media layout to compare suitable sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Looking for Licensing Expo lightbox LED modules or LED bars for licensed-art graphics? Compare internal sources for printed lightboxes in booths that also use video displays.
Which LEDs suit printed artwork lightboxes?
Match source dimensions and optics to the actual printed face, usable frame depth and mounting space. Compare edge-lit and rear-backlight options for the measured frame.
How do I check print visibility beside moving screen content?
Test the illuminated print in its planned position with representative screen content. Check logo, text and artwork visibility from intended viewing distances. Source CCT or lumens alone cannot establish visual balance with a video screen.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What artwork and viewing-layout details should I send?
Send print samples, frame sections and usable depth, source layout, mounting spans, viewing distances, nearby screen positions, connectors and supply. Verify system compatibility. These sources light printed graphics, not LED video pixels.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your artwork and mixed-media layout to compare suitable sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.