For an IPC APEX EXPO stand using printed SEG lightbox graphics, the internal LEDs need to suit the actual frame and fabric. This collection helps exhibit fabricators compare component options for their own builds or a frame whose owner has approved the change. It covers illuminated graphics beside electronics demonstrations.
Choose LED bars from the frame drawing
Measure the clear mounting spans, internal depth and distance from the lenses to the printed face. Keep the driver compartment accessible without disturbing the stretched fabric. Compare our 26 LED Modules products by dimensions, optical pattern, connector and load; a finished SEG frame is not automatically compatible with every bar.
Compare LED bars for the approved printed fabric
- DC24V linkable edge-lit bars: 212mm/9W, 319mm/14W or 480mm/20W for modular lightbox builds.
- 12W/18W DC24V MODULAP lightbox module: 470mm edge-lighting format for compatible fabric frames; verify the connector and fit.
- 20W DC24V rigid lightbox bar: 470mm, 2200lm ±10%, for tested indoor SEG and illuminated-sign layouts.
- 7W DC24V compact lightbox bar: 200mm, 770lm, 200×23×16mm body for short frame sections. Check the Molex 5557 / Mini-Fit Jr. connector family, mating pinout and fit before replacement.
Which LED bars should I compare for a printed SEG lightbox?
The 200 mm 7W edge-lit bar and 212 mm 9W linkable bar are compact options; the 470 mm 20W bar needs a longer clear span. Start with the real mounting space, then test spacing and output using the final print. These DC24V models require suitable power and verified connector polarity.
Can I replace LEDs in a rented exhibition lightbox?
Ask the frame owner or display builder to confirm that modification is allowed and provide the internal layout, connector and driver details. A sealed rental package may need its supplier's service. For an approved build, plan mounting and service access before ordering components; this collection does not establish rental-system fit.
Are these LEDs for inspecting circuit boards or lighting stand graphics?
They are display-lighting components for illuminated graphics, not a specified inspection-machine or curing-light replacement. Evaluate small text and dark printed areas at the intended viewing distance. Send the lit dimensions, depth, mounting drawing, fabric sample, connector photos and driver labels for a relevant LED recommendation.
Before ordering
LED Modules illuminate a printed face inside a lightbox; they are not complete signs. Confirm connector polarity, driver capacity, thermal conditions and connection limits. Check the selected bar length and product pack quantity. Do not assume outdoor or moisture suitability from a retrofit application.
Send cabinet photos, internal dimensions, frame drawings, the existing driver specification and proposed product links through our contact page to discuss a trial selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
For an IPC APEX EXPO stand using printed SEG lightbox graphics, the internal LEDs need to suit the actual frame and fabric. This collection helps exhibit fabricators compare component options for their own builds or a frame whose owner has approved the change. It covers illuminated graphics beside electronics demonstrations.
Choose LED bars from the frame drawing
Measure the clear mounting spans, internal depth and distance from the lenses to the printed face. Keep the driver compartment accessible without disturbing the stretched fabric. Compare our 26 LED Modules products by dimensions, optical pattern, connector and load; a finished SEG frame is not automatically compatible with every bar.
Compare LED bars for the approved printed fabric
- DC24V linkable edge-lit bars: 212mm/9W, 319mm/14W or 480mm/20W for modular lightbox builds.
- 12W/18W DC24V MODULAP lightbox module: 470mm edge-lighting format for compatible fabric frames; verify the connector and fit.
- 20W DC24V rigid lightbox bar: 470mm, 2200lm ±10%, for tested indoor SEG and illuminated-sign layouts.
- 7W DC24V compact lightbox bar: 200mm, 770lm, 200×23×16mm body for short frame sections. Check the Molex 5557 / Mini-Fit Jr. connector family, mating pinout and fit before replacement.
Which LED bars should I compare for a printed SEG lightbox?
The 200 mm 7W edge-lit bar and 212 mm 9W linkable bar are compact options; the 470 mm 20W bar needs a longer clear span. Start with the real mounting space, then test spacing and output using the final print. These DC24V models require suitable power and verified connector polarity.
Can I replace LEDs in a rented exhibition lightbox?
Ask the frame owner or display builder to confirm that modification is allowed and provide the internal layout, connector and driver details. A sealed rental package may need its supplier's service. For an approved build, plan mounting and service access before ordering components; this collection does not establish rental-system fit.
Are these LEDs for inspecting circuit boards or lighting stand graphics?
They are display-lighting components for illuminated graphics, not a specified inspection-machine or curing-light replacement. Evaluate small text and dark printed areas at the intended viewing distance. Send the lit dimensions, depth, mounting drawing, fabric sample, connector photos and driver labels for a relevant LED recommendation.
Before ordering
LED Modules illuminate a printed face inside a lightbox; they are not complete signs. Confirm connector polarity, driver capacity, thermal conditions and connection limits. Check the selected bar length and product pack quantity. Do not assume outdoor or moisture suitability from a retrofit application.
Send cabinet photos, internal dimensions, frame drawings, the existing driver specification and proposed product links through our contact page to discuss a trial selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.