Searching for InstallerSHOW lightbox LED modules or LED bars for exhibition graphic walls? Compare internal sources while planning storage and service access behind the lightbox.
Which LEDs suit a lightbox wall behind product demonstrations?
Match source dimensions and optics to the printed face, usable depth and mounting spans. Test illumination in the actual frame; demo screens are separate displays.
How can rear storage access affect LED mounting and wiring?
Map cupboard openings, rear working clearance and mounting obstructions before fixing sources. Keep connectors and service routes accessible when the graphic frame is closed.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What lightbox and rear-access dimensions should I send?
Send print samples, frame depth, mounting spans, cupboard openings, rear clearance, obstruction positions, connectors and supply. Verify fit and access for each layout. Modules illuminate graphics, not the heating equipment on demonstration.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your lightbox and rear-storage layout to compare suitable sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Searching for InstallerSHOW lightbox LED modules or LED bars for exhibition graphic walls? Compare internal sources while planning storage and service access behind the lightbox.
Which LEDs suit a lightbox wall behind product demonstrations?
Match source dimensions and optics to the printed face, usable depth and mounting spans. Test illumination in the actual frame; demo screens are separate displays.
How can rear storage access affect LED mounting and wiring?
Map cupboard openings, rear working clearance and mounting obstructions before fixing sources. Keep connectors and service routes accessible when the graphic frame is closed.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What lightbox and rear-access dimensions should I send?
Send print samples, frame depth, mounting spans, cupboard openings, rear clearance, obstruction positions, connectors and supply. Verify fit and access for each layout. Modules illuminate graphics, not the heating equipment on demonstration.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your lightbox and rear-storage layout to compare suitable sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.