Presenting architectural projects in illuminated panels at Interior Design Show Toronto? A portfolio can combine bright interiors, shadowed spaces and detailed exterior images. This LED Modules selection supports exhibit fabricators comparing internal light sources across that image series. Browse the complete 26-product catalog below.
Approve the image series, not just its brightest photograph
Choose representative printed faces with different highlight, shadow and detail coverage. Test them with the intended face material, backing and lightbox depth under the planned ambient lighting. Compare the actual illuminated images together from the viewing position and record visible source patterns or lost detail. One bright image, or a camera photograph with automatic exposure, cannot establish how the complete portfolio will look.
Keep a separate face record within the shared portfolio plan
Record each image version and face material alongside its LED model, layout, voltage, connector and driver. Recheck a revised image with the approved setup before treating it as equivalent. Different face sizes or depths may need different layouts; matching the LED name alone does not make the panels match. Confirm each selected product's dimensions and electrical requirements before ordering.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Does a high-CRI LED guarantee faithful architectural image reproduction?
No. Print, translucent material, backing, layout and viewing conditions also affect the result. Evaluate the actual printed assembly; these components do not provide a color-proofing certification or a complete architectural display system.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the portfolio's representative printed images, panel sizes, face materials, usable depths and lighting plan for a component review. Compare all 26 products and retain the per-image sample record for future graphic changes.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Presenting architectural projects in illuminated panels at Interior Design Show Toronto? A portfolio can combine bright interiors, shadowed spaces and detailed exterior images. This LED Modules selection supports exhibit fabricators comparing internal light sources across that image series. Browse the complete 26-product catalog below.
Approve the image series, not just its brightest photograph
Choose representative printed faces with different highlight, shadow and detail coverage. Test them with the intended face material, backing and lightbox depth under the planned ambient lighting. Compare the actual illuminated images together from the viewing position and record visible source patterns or lost detail. One bright image, or a camera photograph with automatic exposure, cannot establish how the complete portfolio will look.
Keep a separate face record within the shared portfolio plan
Record each image version and face material alongside its LED model, layout, voltage, connector and driver. Recheck a revised image with the approved setup before treating it as equivalent. Different face sizes or depths may need different layouts; matching the LED name alone does not make the panels match. Confirm each selected product's dimensions and electrical requirements before ordering.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Does a high-CRI LED guarantee faithful architectural image reproduction?
No. Print, translucent material, backing, layout and viewing conditions also affect the result. Evaluate the actual printed assembly; these components do not provide a color-proofing certification or a complete architectural display system.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the portfolio's representative printed images, panel sizes, face materials, usable depths and lighting plan for a component review. Compare all 26 products and retain the per-image sample record for future graphic changes.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.