Looking for hair Düsseldorf lightbox LED modules? Compare internal LED bars for translucent brand graphics on exhibition partitions.
Which LEDs suit a backlit partition?
Compare edge lighting and rear backlighting using the lit dimensions, clear depth and mounting spans. These internal light sources are for a separate printed lightbox.
Can different brand graphics use the same LED layout?
Test each final translucent print separately. Different ink coverage can change apparent brightness and contrast; matching LED power does not guarantee matching appearance.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What information is needed to choose the LEDs?
Send print samples for every brand face, lit dimensions, clear depth, mounting drawing, connector photos and power labels. Calculate the load from the selected bars.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all LED Modules below. Send your brand graphics and frame details to review a suitable internal lighting layout.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Looking for hair Düsseldorf lightbox LED modules? Compare internal LED bars for translucent brand graphics on exhibition partitions.
Which LEDs suit a backlit partition?
Compare edge lighting and rear backlighting using the lit dimensions, clear depth and mounting spans. These internal light sources are for a separate printed lightbox.
Can different brand graphics use the same LED layout?
Test each final translucent print separately. Different ink coverage can change apparent brightness and contrast; matching LED power does not guarantee matching appearance.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What information is needed to choose the LEDs?
Send print samples for every brand face, lit dimensions, clear depth, mounting drawing, connector photos and power labels. Calculate the load from the selected bars.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all LED Modules below. Send your brand graphics and frame details to review a suitable internal lighting layout.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.