Preparing an indoor graphic-lightbox order after a Glantz Open House? Compare all 26 LED Modules products. Turn a materials discussion into clearly identified components and quantities for an independent build.
Define what each quoted unit contains
For every light-source line, record the exact model and whether the quantity counts an individual module, rigid bar or packaged set. Identify the included connector and cable details separately. Keep the external power supply, controller and mounting hardware visible in the component list instead of assuming they come with a light-source price.
Tie the order lines to the reviewed assembly
Match each component to the builder-reviewed lightbox section and wiring layout. Record the supply and control model, polarity and connector pin assignments. If a seller proposes another pack size, bar length or harness, reconcile the quantities and review the affected assembly before accepting the replacement. A similar description or unit price does not establish an equivalent configuration.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Does a line labelled LED kit mean the lightbox is ready to assemble?
Only the stated contents establish what is supplied. Confirm every required component and its suitability for the proposed indoor graphic lightbox. Our products are internal sources, not a complete cabinet or a guaranteed replacement for the organizer's stocked systems.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the component list with unit definitions, proposed quantities, frame drawing and electrical layout to compare suitable LED modules.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Preparing an indoor graphic-lightbox order after a Glantz Open House? Compare all 26 LED Modules products. Turn a materials discussion into clearly identified components and quantities for an independent build.
Define what each quoted unit contains
For every light-source line, record the exact model and whether the quantity counts an individual module, rigid bar or packaged set. Identify the included connector and cable details separately. Keep the external power supply, controller and mounting hardware visible in the component list instead of assuming they come with a light-source price.
Tie the order lines to the reviewed assembly
Match each component to the builder-reviewed lightbox section and wiring layout. Record the supply and control model, polarity and connector pin assignments. If a seller proposes another pack size, bar length or harness, reconcile the quantities and review the affected assembly before accepting the replacement. A similar description or unit price does not establish an equivalent configuration.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Does a line labelled LED kit mean the lightbox is ready to assemble?
Only the stated contents establish what is supplied. Confirm every required component and its suitability for the proposed indoor graphic lightbox. Our products are internal sources, not a complete cabinet or a guaranteed replacement for the organizer's stocked systems.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the component list with unit definitions, proposed quantities, frame drawing and electrical layout to compare suitable LED modules.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.