Looking for GaLaBau lightbox LED modules? Choose internal LED bars for a translucent logo sign that needs to remain readable from the aisle.
Which LEDs suit my backlit logo sign?
Compare edge lighting and rear backlighting using the lit dimensions, clear depth and mounting spans. Check the actual translucent logo print; vehicle work lights and front-lit stand walls need different lighting.
Will a brighter lightbox make the logo clearer?
Test the finished logo from the intended viewing distance. More brightness can wash out dark printed areas. Compare uniformity and contrast before increasing wattage or changing LED spacing.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What should I send for LED selection?
Send the logo print sample, lit dimensions, clear depth, mounting drawing, viewing distance, connector photos and power labels. Calculate the load from the selected bars.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all LED Modules below. Send your logo print and frame details to review suitable internal light sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Looking for GaLaBau lightbox LED modules? Choose internal LED bars for a translucent logo sign that needs to remain readable from the aisle.
Which LEDs suit my backlit logo sign?
Compare edge lighting and rear backlighting using the lit dimensions, clear depth and mounting spans. Check the actual translucent logo print; vehicle work lights and front-lit stand walls need different lighting.
Will a brighter lightbox make the logo clearer?
Test the finished logo from the intended viewing distance. More brightness can wash out dark printed areas. Compare uniformity and contrast before increasing wattage or changing LED spacing.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What should I send for LED selection?
Send the logo print sample, lit dimensions, clear depth, mounting drawing, viewing distance, connector photos and power labels. Calculate the load from the selected bars.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all LED Modules below. Send your logo print and frame details to review suitable internal light sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.