Fujifilm offers Acuity product demonstrations and printed samples. Its Acuity Triton guidance includes backlit films and fabrics. For lightbox makers comparing these face materials, this collection focuses on testing each material in its intended assembly rather than assuming both give the same illuminated result.
Prepare a labelled sample for each face material
Use comparable artwork and record the film or fabric reference, print process and intended mounting method. Keep the sample identities separate; material substitution can change the finished graphic even when the artwork is unchanged.
Compare each material with its intended LED arrangement
Test film and fabric in representative boxes with the proposed layout and supply. Note the accepted result for each construction. Do not transfer a film approval to a fabric order without checking the new assembled sample.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Which LED modules should I choose for a fabric or film lightbox?
Start with box depth, face material and illumination method. Compare edge-lit bars with rear-backlight bars, then test the selected model, layout and power supply in the complete box. These are independent lightbox LEDs, not Fujifilm printer parts or UV curing LEDs.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send box dimensions, film and fabric references, mounting details and supply requirements to discuss candidates.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Fujifilm offers Acuity product demonstrations and printed samples. Its Acuity Triton guidance includes backlit films and fabrics. For lightbox makers comparing these face materials, this collection focuses on testing each material in its intended assembly rather than assuming both give the same illuminated result.
Prepare a labelled sample for each face material
Use comparable artwork and record the film or fabric reference, print process and intended mounting method. Keep the sample identities separate; material substitution can change the finished graphic even when the artwork is unchanged.
Compare each material with its intended LED arrangement
Test film and fabric in representative boxes with the proposed layout and supply. Note the accepted result for each construction. Do not transfer a film approval to a fabric order without checking the new assembled sample.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Which LED modules should I choose for a fabric or film lightbox?
Start with box depth, face material and illumination method. Compare edge-lit bars with rear-backlight bars, then test the selected model, layout and power supply in the complete box. These are independent lightbox LEDs, not Fujifilm printer parts or UV curing LEDs.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send box dimensions, film and fabric references, mounting details and supply requirements to discuss candidates.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.