Fortidia US Connect Partner Expo brings franchise businesses and supplier partners together. For print and sign shops handling different indoor lightbox jobs, build a component stock plan from real project requirements. Browse all LED Modules and record which models suit each planned trial.
Create a job-to-component comparison
For each proposed lightbox, record frame depth, available bar length, mounting, voltage, connectors, optics and control needs. Group jobs only where these requirements match. Keep rear-backlight bars and edge-lit bars distinct, even when their wattages are similar.
Separate workshop stock from project-specific orders
List common verified components, then flag special lengths, connector arrangements or CCT options for individual enquiries. Choose an initial assortment for trial builds rather than assuming one model serves every job. Recheck the exact product options before placing a repeat order.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Does a shared voltage make one LED bar suitable for every lightbox job?
No. DC24V is only one requirement. Dimensions, source position, optics, mounting, wiring and controls must also suit the complete assembly. A workshop stock plan does not establish compatibility with a franchise supplier’s proprietary system.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the job comparison, proposed stock models, special options, trial observations and required quantities through our contact page.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Fortidia US Connect Partner Expo brings franchise businesses and supplier partners together. For print and sign shops handling different indoor lightbox jobs, build a component stock plan from real project requirements. Browse all LED Modules and record which models suit each planned trial.
Create a job-to-component comparison
For each proposed lightbox, record frame depth, available bar length, mounting, voltage, connectors, optics and control needs. Group jobs only where these requirements match. Keep rear-backlight bars and edge-lit bars distinct, even when their wattages are similar.
Separate workshop stock from project-specific orders
List common verified components, then flag special lengths, connector arrangements or CCT options for individual enquiries. Choose an initial assortment for trial builds rather than assuming one model serves every job. Recheck the exact product options before placing a repeat order.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Does a shared voltage make one LED bar suitable for every lightbox job?
No. DC24V is only one requirement. Dimensions, source position, optics, mounting, wiring and controls must also suit the complete assembly. A workshop stock plan does not establish compatibility with a franchise supplier’s proprietary system.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the job comparison, proposed stock models, special options, trial observations and required quantities through our contact page.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.