Searching for EuroCIS lightbox LED modules or LED bars for printed retail technology booth graphics? Compare internal sources separately from RGB outline lights and video screens.
Which LEDs suit printed retail technology lightboxes?
Match source dimensions and optics to the printed face, usable frame depth and mounting space. Compare edge-lit and rear-backlight layouts in the actual frame.
Can graphic LEDs share a controller with RGB outline lighting?
Do not assume common control because the lights occupy one stand. Check source type, voltage, pinout, load and controller output for each circuit. Dual-CCT switching is not RGB control.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What graphic-frame and circuit details should I send?
Send print and face samples, usable depth, mounting spans, connectors, source loads, supply and the outline-light controller specifications. Verify separate systems before connecting. These sources illuminate printed graphics, not video pixels.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your graphic frames and circuit plan to compare suitable sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Searching for EuroCIS lightbox LED modules or LED bars for printed retail technology booth graphics? Compare internal sources separately from RGB outline lights and video screens.
Which LEDs suit printed retail technology lightboxes?
Match source dimensions and optics to the printed face, usable frame depth and mounting space. Compare edge-lit and rear-backlight layouts in the actual frame.
Can graphic LEDs share a controller with RGB outline lighting?
Do not assume common control because the lights occupy one stand. Check source type, voltage, pinout, load and controller output for each circuit. Dual-CCT switching is not RGB control.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What graphic-frame and circuit details should I send?
Send print and face samples, usable depth, mounting spans, connectors, source loads, supply and the outline-light controller specifications. Verify separate systems before connecting. These sources illuminate printed graphics, not video pixels.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your graphic frames and circuit plan to compare suitable sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.