Looking for EASA convention lightbox LED modules for a portable graphic backdrop? Compare internal LED bars for your own straight or L-shaped lightbox layout.
Which LED bars suit a straight or L-shaped lightbox backdrop?
Choose from each illuminated face, clear frame depth, front material and mounting drawing. Review the separate panels in both arrangements with the final fabric sample; the overall booth width does not determine the LED layout.
Does changing the booth layout change the LED and cable plan?
Check the actual drawings. Reorienting panels can change the available mounting space, cable route and service access. Test the faces in the proposed arrangements and review each power run rather than assuming the same plan works around every corner.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Can I change the printed cover without changing the LEDs?
A new print can change transmitted brightness and colour even when its dimensions match. Check the new fabric and ink coverage with the existing light source. For new bars, send both layout drawings, frame sections and electrical labels; frame and connector compatibility need verification.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all LED Modules below. Send both layout drawings and the final graphic sample to review internal sources for your own portable lightbox construction.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Looking for EASA convention lightbox LED modules for a portable graphic backdrop? Compare internal LED bars for your own straight or L-shaped lightbox layout.
Which LED bars suit a straight or L-shaped lightbox backdrop?
Choose from each illuminated face, clear frame depth, front material and mounting drawing. Review the separate panels in both arrangements with the final fabric sample; the overall booth width does not determine the LED layout.
Does changing the booth layout change the LED and cable plan?
Check the actual drawings. Reorienting panels can change the available mounting space, cable route and service access. Test the faces in the proposed arrangements and review each power run rather than assuming the same plan works around every corner.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Can I change the printed cover without changing the LEDs?
A new print can change transmitted brightness and colour even when its dimensions match. Check the new fabric and ink coverage with the existing light source. For new bars, send both layout drawings, frame sections and electrical labels; frame and connector compatibility need verification.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all LED Modules below. Send both layout drawings and the final graphic sample to review internal sources for your own portable lightbox construction.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.