Searching for Commercial Vehicle Show lightbox LED modules? Compare internal sources for printed component diagrams and product-image panels beside your vehicle display.
Which LEDs suit component-diagram lightboxes?
Compare edge-lit and rear-backlight layouts with the actual printed face and usable depth. Test fine diagram lines, labels and pale areas together; source direction and spacing affect the result.
Can graphic backlighting replace vehicle demonstration lights?
Treat these as separate tasks. Internal lightbox LEDs illuminate the printed graphic; they do not establish suitability for vehicle-integrated lighting or lighting a real component demonstration.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What print and frame details should I send?
Send the finished diagram, smallest line and label sizes, viewing distance, frame section, usable depth, face material and supply details. Confirm mounting and wiring with your builder before ordering.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Contact us with your component graphic and lightbox dimensions to compare suitable internal sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Searching for Commercial Vehicle Show lightbox LED modules? Compare internal sources for printed component diagrams and product-image panels beside your vehicle display.
Which LEDs suit component-diagram lightboxes?
Compare edge-lit and rear-backlight layouts with the actual printed face and usable depth. Test fine diagram lines, labels and pale areas together; source direction and spacing affect the result.
Can graphic backlighting replace vehicle demonstration lights?
Treat these as separate tasks. Internal lightbox LEDs illuminate the printed graphic; they do not establish suitability for vehicle-integrated lighting or lighting a real component demonstration.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What print and frame details should I send?
Send the finished diagram, smallest line and label sizes, viewing distance, frame section, usable depth, face material and supply details. Confirm mounting and wiring with your builder before ordering.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Contact us with your component graphic and lightbox dimensions to compare suitable internal sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.