Looking for BrauBeviale lightbox LED modules or LED bars for backlit brewery booth graphics? Compare internal sources for compatible indoor brand lightboxes behind demonstration bars, separately from beverage equipment.
Which LED modules suit bar-back graphic lightboxes?
Compare edge lighting and rear backlighting using the actual print, lit dimensions, usable frame depth and mounting spans. Check length, optics and print distance. LED bars do not include the frame, graphic, counter or dispensing equipment.
Where should lightbox power and connectors go near a demo bar?
Mark graphic electrical access separately from chiller, dispensing-line and keg-service routes. Keep approved supply and connector access available without obstructing bar maintenance. Confirm the actual installation environment; nearby liquids do not make indoor LED modules splashproof.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What layout information should I send before ordering?
Send lit dimensions, usable depth, mounts, print sample, voltage, connector photos and a bar-service drawing. Confirm source positions, load, wiring and access. Beverage equipment, cleaning, moisture and food-service suitability need separate checks from graphic illumination.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all LED Modules below. Send the graphic lightbox specification and marked bar-service layout to select compatible internal sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Looking for BrauBeviale lightbox LED modules or LED bars for backlit brewery booth graphics? Compare internal sources for compatible indoor brand lightboxes behind demonstration bars, separately from beverage equipment.
Which LED modules suit bar-back graphic lightboxes?
Compare edge lighting and rear backlighting using the actual print, lit dimensions, usable frame depth and mounting spans. Check length, optics and print distance. LED bars do not include the frame, graphic, counter or dispensing equipment.
Where should lightbox power and connectors go near a demo bar?
Mark graphic electrical access separately from chiller, dispensing-line and keg-service routes. Keep approved supply and connector access available without obstructing bar maintenance. Confirm the actual installation environment; nearby liquids do not make indoor LED modules splashproof.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What layout information should I send before ordering?
Send lit dimensions, usable depth, mounts, print sample, voltage, connector photos and a bar-service drawing. Confirm source positions, load, wiring and access. Beverage equipment, cleaning, moisture and food-service suitability need separate checks from graphic illumination.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all LED Modules below. Send the graphic lightbox specification and marked bar-service layout to select compatible internal sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.