Aluvision Innovation Days introduce professionals to modular display ideas and practical demonstrations. For your own independently designed indoor lightbox, use this collection to compare LED Modules and plan how a revised configuration will be evaluated. All LED Modules are available below.
Track what changes between lightbox configurations
Compare the proposed layout with the previous sample: face dimensions, cavity depth, illuminated sides, graphic material and available LED mounting positions. Note any moved joints, wiring routes or power locations. Reusing frame parts does not establish that an existing LED layout will illuminate the revised face evenly.
Evaluate the revised build before repeat orders
Assemble the intended configuration with its actual graphic and suitable separate power and controls. Review illumination at seams and edges, access to connectors and removal of components for servicing. Record the chosen LED model and options with the new sample observations rather than approving a repeat order from the old photograph.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Are these replacement modules for an Aluvision light wall?
No authorized replacement or universal Aluvision compatibility is claimed. A modular-system demonstration is not a specification for an independently built lightbox. Identify the exact structure and electrical arrangement before considering a component change.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the previous and proposed frame sections, changed dimensions, graphic, candidate models and new sample observations through our contact page.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Aluvision Innovation Days introduce professionals to modular display ideas and practical demonstrations. For your own independently designed indoor lightbox, use this collection to compare LED Modules and plan how a revised configuration will be evaluated. All LED Modules are available below.
Track what changes between lightbox configurations
Compare the proposed layout with the previous sample: face dimensions, cavity depth, illuminated sides, graphic material and available LED mounting positions. Note any moved joints, wiring routes or power locations. Reusing frame parts does not establish that an existing LED layout will illuminate the revised face evenly.
Evaluate the revised build before repeat orders
Assemble the intended configuration with its actual graphic and suitable separate power and controls. Review illumination at seams and edges, access to connectors and removal of components for servicing. Record the chosen LED model and options with the new sample observations rather than approving a repeat order from the old photograph.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Are these replacement modules for an Aluvision light wall?
No authorized replacement or universal Aluvision compatibility is claimed. A modular-system demonstration is not a specification for an independently built lightbox. Identify the exact structure and electrical arrangement before considering a component change.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the previous and proposed frame sections, changed dimensions, graphic, candidate models and new sample observations through our contact page.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.