Looking for Ace Fall Convention lightbox LED modules? Compare internal LED bars for branded graphic lightboxes with product shelves.
Which LEDs suit a lightbox with product shelves?
Compare edge lighting and rear backlighting using lit dimensions, clear depth and fixing positions. Check where shelf hardware enters the enclosure before selecting the source.
Can shelves or brackets create dark areas?
Fixtures in the light path can create shadows. Test the final print with the planned shelf brackets and product positions. Select LED placement from the actual layout; these LEDs do not establish shelf load capacity.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What should I send for LED selection?
Send shelf and fixing drawings, print samples, lit dimensions, clear depth, connector photos and power labels. Calculate the load from the selected bars.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all LED Modules below. Send your lightbox and shelf details to review a suitable internal LED layout.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Looking for Ace Fall Convention lightbox LED modules? Compare internal LED bars for branded graphic lightboxes with product shelves.
Which LEDs suit a lightbox with product shelves?
Compare edge lighting and rear backlighting using lit dimensions, clear depth and fixing positions. Check where shelf hardware enters the enclosure before selecting the source.
Can shelves or brackets create dark areas?
Fixtures in the light path can create shadows. Test the final print with the planned shelf brackets and product positions. Select LED placement from the actual layout; these LEDs do not establish shelf load capacity.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What should I send for LED selection?
Send shelf and fixing drawings, print samples, lit dimensions, clear depth, connector photos and power labels. Calculate the load from the selected bars.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all LED Modules below. Send your lightbox and shelf details to review a suitable internal LED layout.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.