50W Silver Linkable LED Trade Show Light – 5500lm, Fixed CCT

Silver 50W linkable LED trade show light for large exhibition graphics, island booths and high-output display lighting. Choose one fixed color-temperature range and the plug required for the destination.

• Output: 50W, 5,500 lm, CRI 90+
• Fixed CCT options: 2700-3200K, 4500-4700K or 6500-7000K
• Beam: 60 degrees
• Adjustment: 359-degree rotation and 0-90-degree tilt
• Linkable: published configuration supports up to 6 fixtures per run, subject to electrical limits
• Variants: silver body; US, EU, UK or AU plug

High-Output Fixed-CCT Exhibition Light

This page is for the silver fixed-CCT 50W model. Select the required color temperature at checkout; the fixture does not switch between CCT settings after purchase. Choose fixed CCT when the booth already uses one established lighting color and on-site switching is unnecessary.

At 5,500 lm per fixture, this model provides more output from each mounting position than lower-wattage booth lights. Actual coverage depends on mounting height, arm position, beam overlap, ambient hall lighting, graphic reflectance and target brightness. Test the proposed layout before finalizing quantity.

Specifications

Certification and electrical acceptance vary by venue and destination. Request the applicable documents and confirm that the exact model, plug and production configuration meet the project requirements.

What's Included

• 1 x 50W Silver Linkable LED Trade Show Light – 5500lm, Fixed CCT
• 1 x 3m power cord
• 1x 1m link cable
• 1 x Aluminum clamp and 2 x aluminum sliding tabs

Confirm clamp opening, mounting surface and plug type against the booth system before ordering.

Linking Up to Six Lights

The published configuration supports up to 6 fixtures per run, representing a 300W nominal lighting load. The safe quantity may be lower depending on cable and plug ratings, branch-circuit capacity, local voltage, extension layout, connector condition and venue rules. Do not exceed the lowest-rated component in the complete system.

• Use the plug version intended for the destination.
• Inspect power and link cables before each installation.
• Confirm available circuit capacity with the venue or electrical provider.
• Distribute loads when required by the show contractor or local rules.

Fixed CCT or Tri-CCT?

Compare the 50W Tri-CCT trade show light or the black fixed-CCT 50W light. For wattage planning, read the 25W vs 50W booth-light guide.

Planning the Installation

Fixture quantity cannot be selected from booth dimensions alone. Consider graphic width and height, mounting distance, arm reach, beam overlap, ambient light and whether the priority is vertical graphics, products or counters.

Send us the booth layout, graphic dimensions and show location for a fixture and connection recommendation. For project quantities, see wholesale and volume pricing.