Looking for World Stroke Congress lightbox LED modules for a stand with fabric panels and screens? First identify the actual graphic lightboxes, then compare internal LED bars for those enclosures.
Does every fabric panel on my stand need LED bars?
No. An ordinary fabric panel is not automatically an internally lit display. Identify each lightbox enclosure and its light-transmitting front. Keep non-illuminated graphics and monitor content separate when calculating internal sources, so the component order follows the lit faces rather than the whole stand.
Can one LED layout cover separate lightbox graphics?
Not without checking each enclosure. Compare its lit size, clear depth, final graphic material and mounting positions. Different panels may need different optics, source spacing or output. Test each proposed arrangement with the actual front instead of copying the layout from an adjacent graphic.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What should I send for a mixed graphic-display LED order?
Mark the lightbox faces on your stand drawing and send their sections, final print samples, mounting and cable-access details, plus power and connector labels. Confirm ownership or permission before modifying a rental frame. Check voltage, load, polarity and pinout; these sources are for exhibit graphics, not medical devices or screens.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all LED Modules below. Send the marked stand plan and actual lightbox details to review suitable internal sources for the illuminated graphics.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Looking for World Stroke Congress lightbox LED modules for a stand with fabric panels and screens? First identify the actual graphic lightboxes, then compare internal LED bars for those enclosures.
Does every fabric panel on my stand need LED bars?
No. An ordinary fabric panel is not automatically an internally lit display. Identify each lightbox enclosure and its light-transmitting front. Keep non-illuminated graphics and monitor content separate when calculating internal sources, so the component order follows the lit faces rather than the whole stand.
Can one LED layout cover separate lightbox graphics?
Not without checking each enclosure. Compare its lit size, clear depth, final graphic material and mounting positions. Different panels may need different optics, source spacing or output. Test each proposed arrangement with the actual front instead of copying the layout from an adjacent graphic.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What should I send for a mixed graphic-display LED order?
Mark the lightbox faces on your stand drawing and send their sections, final print samples, mounting and cable-access details, plus power and connector labels. Confirm ownership or permission before modifying a rental frame. Check voltage, load, polarity and pinout; these sources are for exhibit graphics, not medical devices or screens.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all LED Modules below. Send the marked stand plan and actual lightbox details to review suitable internal sources for the illuminated graphics.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.