Searching for wire Düsseldorf lightbox LED modules or LED bars for circular exhibition signs? Compare internal sources for round illuminated brand signs, with the face diameter and mounting space in view.
Which LEDs suit a circular exhibition lightbox?
Compare edge-lit and rear-backlight layouts using the actual face material, diameter and depth. Test light distribution across the centre and around the rim with the finished graphic; a rectangular spacing plan needs review for a circular face.
Can straight LED bars follow a round frame?
Rigid bars stay straight. Check each model’s length against the available straight mounting spans and leave room for connectors. Do not bend or cut a bar to match the rim unless its product instructions explicitly permit it.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What circular frame and face details should I send?
Send the face diameter and material, cavity depth, frame sections, straight mounting spans, lens orientation and connector clearance, plus supply details. Internal sign modules do not replace video-wall pixels or illuminate wire-processing machinery.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your circular lightbox details to compare suitable internal sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Searching for wire Düsseldorf lightbox LED modules or LED bars for circular exhibition signs? Compare internal sources for round illuminated brand signs, with the face diameter and mounting space in view.
Which LEDs suit a circular exhibition lightbox?
Compare edge-lit and rear-backlight layouts using the actual face material, diameter and depth. Test light distribution across the centre and around the rim with the finished graphic; a rectangular spacing plan needs review for a circular face.
Can straight LED bars follow a round frame?
Rigid bars stay straight. Check each model’s length against the available straight mounting spans and leave room for connectors. Do not bend or cut a bar to match the rim unless its product instructions explicitly permit it.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What circular frame and face details should I send?
Send the face diameter and material, cavity depth, frame sections, straight mounting spans, lens orientation and connector clearance, plus supply details. Internal sign modules do not replace video-wall pixels or illuminate wire-processing machinery.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your circular lightbox details to compare suitable internal sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.