Choosing internal LED bars for a UK Construction Week backlit graphic wall? Compare sources that fit the lightbox section, then plan screen recesses and external booth spotlights separately from the printed panel’s illumination.
Which LED bars fit a lightbox wall with recessed screens?
Measure the clear space behind the transmitting graphic, including monitor mounts, crossbars and cable routes. Compare bar length, lens direction and mounting clearance against that section. Test the final print across screen openings and panel joins; an uninterrupted sample panel cannot reveal all shadows in the assembled wall.
How do I calculate the lightbox’s LED power load?
Add the rated watts of the selected bars, then size the compatible supply and wiring with appropriate design margin. For example, three of the featured 20W bars have a nominal LED load of 60W. This is an arithmetic example, not a recommended bar count. A drawing’s socket count does not identify LED quantity or driver capacity.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Can the screen supply or arm lights power these LED bars?
Do not assume they can. The three featured bars require compatible DC24V power; a screen outlet or an external arm light is a different circuit task. Check the actual supply output, total load, pinout and polarity. Keep the panel connections accessible when the screen brackets and storage fittings are installed.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all 26 products below. Send the illuminated wall dimensions, clear section, screen-recess positions and existing power details for a component quote. LED bars do not include printed panels, wall structures, monitors or external spotlights.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Choosing internal LED bars for a UK Construction Week backlit graphic wall? Compare sources that fit the lightbox section, then plan screen recesses and external booth spotlights separately from the printed panel’s illumination.
Which LED bars fit a lightbox wall with recessed screens?
Measure the clear space behind the transmitting graphic, including monitor mounts, crossbars and cable routes. Compare bar length, lens direction and mounting clearance against that section. Test the final print across screen openings and panel joins; an uninterrupted sample panel cannot reveal all shadows in the assembled wall.
How do I calculate the lightbox’s LED power load?
Add the rated watts of the selected bars, then size the compatible supply and wiring with appropriate design margin. For example, three of the featured 20W bars have a nominal LED load of 60W. This is an arithmetic example, not a recommended bar count. A drawing’s socket count does not identify LED quantity or driver capacity.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Can the screen supply or arm lights power these LED bars?
Do not assume they can. The three featured bars require compatible DC24V power; a screen outlet or an external arm light is a different circuit task. Check the actual supply output, total load, pinout and polarity. Keep the panel connections accessible when the screen brackets and storage fittings are installed.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all 26 products below. Send the illuminated wall dimensions, clear section, screen-recess positions and existing power details for a component quote. LED bars do not include printed panels, wall structures, monitors or external spotlights.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.