Looking for Travel & Adventure Show lightbox LED modules? Compare sources for your own destination-brand display. The series’ Seattle exhibitor kit shows single and double-sided printed lightbox options; current packages and stand rules should be confirmed separately.
Does my stand need illuminated graphics on both sides?
Identify which faces visitors can see from aisles and meeting areas. A rear face against a wall may not need the same graphic treatment as a freestanding face. Specify each printed side and usable internal space before choosing LEDs; two visible faces do not necessarily mean identical source quantities.
Can a single-sided LED layout evenly light both faces?
Do not assume it can. Source direction, mounting position and the distance to each face affect the result. Test both actual prints with the proposed frame and sources. Compare suitable layouts rather than assuming that adding a rear graphic converts a single-sided arrangement into a verified double-sided lightbox.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What should I send for a double-sided lightbox recommendation?
Provide frame section, usable depth, dimensions and material of each printed face, planned source positions and power arrangement. These modules are components for a specified build; no compatibility with the exhibitor-kit rental frames or permission to alter supplied equipment is claimed.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send a sketch showing both faces and visitor viewpoints, print materials and frame dimensions through Contact us to compare sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Looking for Travel & Adventure Show lightbox LED modules? Compare sources for your own destination-brand display. The series’ Seattle exhibitor kit shows single and double-sided printed lightbox options; current packages and stand rules should be confirmed separately.
Does my stand need illuminated graphics on both sides?
Identify which faces visitors can see from aisles and meeting areas. A rear face against a wall may not need the same graphic treatment as a freestanding face. Specify each printed side and usable internal space before choosing LEDs; two visible faces do not necessarily mean identical source quantities.
Can a single-sided LED layout evenly light both faces?
Do not assume it can. Source direction, mounting position and the distance to each face affect the result. Test both actual prints with the proposed frame and sources. Compare suitable layouts rather than assuming that adding a rear graphic converts a single-sided arrangement into a verified double-sided lightbox.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What should I send for a double-sided lightbox recommendation?
Provide frame section, usable depth, dimensions and material of each printed face, planned source positions and power arrangement. These modules are components for a specified build; no compatibility with the exhibitor-kit rental frames or permission to alter supplied equipment is claimed.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send a sketch showing both faces and visitor viewpoints, print materials and frame dimensions through Contact us to compare sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.