Building SEG fabric lightbox panels or towers around a Toronto International Boat Show dealer display? Compare internal LED bars for printed brand and model graphics. All 26 Modules products are available below.
Where should lightbox graphics sit around the boats?
Review the floor plan from the visitor's approach. Check that graphics remain visible beside hulls, access steps and demonstration areas. Test printed blue-water images and white boat details in the actual frame, including corners and seams.
How can towers and accent panels be rebuilt reliably?
Measure each frame section separately and label matching LED runs, connectors and graphic positions. Check cable exit paths and driver access before packing. Reassemble one complete panel to test uniformity and confirm that connections remain accessible.
Compare LED lightbox sources
- Linkable edge-lit bars: DC24V, 212mm/9W, 319mm/14W or 480mm/20W; standard 20°×60° optics.
- 7W compact edge-lit bar: DC24V, 200×23×16mm, 770lm; standard 20°×60° optics.
- 20W rigid edge-lit bar: DC24V, 470×24×16mm including lens, 2200lm ±10%, 10°×40° optics.
Are these boat navigation lights or waterproof marine LEDs?
These are internal display-lightbox components, not vessel lighting. An indoor boat-show setting does not establish waterproofing or compatibility with a boat's electrical system. Confirm the chosen model's rating and approved supply.
Before ordering
Featured bars need separate DC24V constant-voltage supplies. Verify total load, polarity, connector pinout and cable routing. Only the featured linkable family lists up to five compatible bars per run, subject to cable and load checks; other models have their own requirements.
Send the display plan, frame-section dimensions, fabric samples and assembly sequence for a sample layout and quotation.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Building SEG fabric lightbox panels or towers around a Toronto International Boat Show dealer display? Compare internal LED bars for printed brand and model graphics. All 26 Modules products are available below.
Where should lightbox graphics sit around the boats?
Review the floor plan from the visitor's approach. Check that graphics remain visible beside hulls, access steps and demonstration areas. Test printed blue-water images and white boat details in the actual frame, including corners and seams.
How can towers and accent panels be rebuilt reliably?
Measure each frame section separately and label matching LED runs, connectors and graphic positions. Check cable exit paths and driver access before packing. Reassemble one complete panel to test uniformity and confirm that connections remain accessible.
Compare LED lightbox sources
- Linkable edge-lit bars: DC24V, 212mm/9W, 319mm/14W or 480mm/20W; standard 20°×60° optics.
- 7W compact edge-lit bar: DC24V, 200×23×16mm, 770lm; standard 20°×60° optics.
- 20W rigid edge-lit bar: DC24V, 470×24×16mm including lens, 2200lm ±10%, 10°×40° optics.
Are these boat navigation lights or waterproof marine LEDs?
These are internal display-lightbox components, not vessel lighting. An indoor boat-show setting does not establish waterproofing or compatibility with a boat's electrical system. Confirm the chosen model's rating and approved supply.
Before ordering
Featured bars need separate DC24V constant-voltage supplies. Verify total load, polarity, connector pinout and cable routing. Only the featured linkable family lists up to five compatible bars per run, subject to cable and load checks; other models have their own requirements.
Send the display plan, frame-section dimensions, fabric samples and assembly sequence for a sample layout and quotation.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.