Looking for Toronto Biennial of Art lightbox LED modules or LED bars for commissioned photographic panels? Compare internal sources using the actual backlit prints.
Which LEDs suit a photographic exhibition lightbox?
Match dimensions and optics to the print, depth and mounting spans. The featured 20W rigid model is IP20 for indoor use; verify site exposure and the complete assembly’s protection.
How should separate lightbox prints be compared together?
Test the actual prints side by side under intended site lighting. Compare light and dark image areas, visual balance and viewing angles; nominal wattage alone cannot establish consistent image appearance.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What print, installation and power details should I send?
Send each print sample, frame dimensions, depth, mounting spans, panel sequence, viewing positions, protection, maintenance access and supply. Check wiring limits per model. Artwork-conservation suitability, identical colour appearance and existing-artwork retrofit fit are not established.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your print samples and frame layout to compare suitable sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Looking for Toronto Biennial of Art lightbox LED modules or LED bars for commissioned photographic panels? Compare internal sources using the actual backlit prints.
Which LEDs suit a photographic exhibition lightbox?
Match dimensions and optics to the print, depth and mounting spans. The featured 20W rigid model is IP20 for indoor use; verify site exposure and the complete assembly’s protection.
How should separate lightbox prints be compared together?
Test the actual prints side by side under intended site lighting. Compare light and dark image areas, visual balance and viewing angles; nominal wattage alone cannot establish consistent image appearance.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What print, installation and power details should I send?
Send each print sample, frame dimensions, depth, mounting spans, panel sequence, viewing positions, protection, maintenance access and supply. Check wiring limits per model. Artwork-conservation suitability, identical colour appearance and existing-artwork retrofit fit are not established.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your print samples and frame layout to compare suitable sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.