Need Snow Travel Expo lightbox LED modules for a panoramic header? The organizer’s upgrade kit shows physical custom lightboxes. Compare internal sources for your own printed scenic display; confirm stand and suspension arrangements separately.
Which LED bars suit a shallow panoramic lightbox header?
Measure usable depth and the distance from each source to the printed face. Compare side-directed and rear-directed sources with the proposed frame section. A long header needs a tested layout, not a source chosen only by total wattage.
Why can snow and sky artwork reveal uneven backlighting?
Large pale areas can make bright bands and dark edges easier to notice. Test a full-size section of the actual print with the proposed LEDs. Assess the whole viewing area before changing source positions or quantities.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What should I send before buying header LEDs?
Send header dimensions, frame section, usable depth, print sample and intended supply. Mounting and suspension require separate assessment; choosing LED modules does not establish rigging approval or fit in a supplier’s hire frame.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Contact us with the frame section and scenic print sample to compare sources for your panoramic header.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Need Snow Travel Expo lightbox LED modules for a panoramic header? The organizer’s upgrade kit shows physical custom lightboxes. Compare internal sources for your own printed scenic display; confirm stand and suspension arrangements separately.
Which LED bars suit a shallow panoramic lightbox header?
Measure usable depth and the distance from each source to the printed face. Compare side-directed and rear-directed sources with the proposed frame section. A long header needs a tested layout, not a source chosen only by total wattage.
Why can snow and sky artwork reveal uneven backlighting?
Large pale areas can make bright bands and dark edges easier to notice. Test a full-size section of the actual print with the proposed LEDs. Assess the whole viewing area before changing source positions or quantities.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What should I send before buying header LEDs?
Send header dimensions, frame section, usable depth, print sample and intended supply. Mounting and suspension require separate assessment; choosing LED modules does not establish rigging approval or fit in a supplier’s hire frame.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Contact us with the frame section and scenic print sample to compare sources for your panoramic header.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.