SIGN2COM brings signage and visual-communication professionals together. Select the light source for the display material and mounting direction before approving a sample. Browse the full LED Modules range below.
Match the light source to the illuminated surface
An edge-lit bar mounts inside the frame and directs light across the graphic. Direct-backlight bars and panels face the material from behind. Compare textile graphics and translucent stone separately; a source that suits one sample is not automatically suitable for another.
Approve the actual material at the planned distance
Test the final fabric or stone with the intended cavity depth. Inspect visible LED points, dark zones and color shifts. Record the chosen source, white-light setting and layout with the approved sample before setting production quantities.
Compare LED lightbox sources
- 13W edge-lit bar: 360mm, DC24V, 1430lm and 15°×60° lens for tested frame-edge lighting.
- 12W dual-CCT direct-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; choose the two white channels.
- Flexible stone-backlight panel: 480×240mm, DC24V, 24W fixed white or 48W tunable white, with 120° beam.
Does a dual-CCT bar produce every white-light setting?
Each variant has two specified white-light channels. Intermediate blending needs a compatible controller that supports channel mixing; it is not a feature of every switch.
Before ordering
These are internal sources, not finished displays. Verify DC24V power and wiring. The dual-CCT bar excludes driver, switch and controller. For the stone panel, check the selected accessory bundle; the 48W tunable version needs compatible CCT control. Cut only on the marked 20×20mm grid.
Send the material type, thickness or graphic sample, illuminated dimensions, cavity depth and desired white-light control through our contact page for a source review.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
SIGN2COM brings signage and visual-communication professionals together. Select the light source for the display material and mounting direction before approving a sample. Browse the full LED Modules range below.
Match the light source to the illuminated surface
An edge-lit bar mounts inside the frame and directs light across the graphic. Direct-backlight bars and panels face the material from behind. Compare textile graphics and translucent stone separately; a source that suits one sample is not automatically suitable for another.
Approve the actual material at the planned distance
Test the final fabric or stone with the intended cavity depth. Inspect visible LED points, dark zones and color shifts. Record the chosen source, white-light setting and layout with the approved sample before setting production quantities.
Compare LED lightbox sources
- 13W edge-lit bar: 360mm, DC24V, 1430lm and 15°×60° lens for tested frame-edge lighting.
- 12W dual-CCT direct-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; choose the two white channels.
- Flexible stone-backlight panel: 480×240mm, DC24V, 24W fixed white or 48W tunable white, with 120° beam.
Does a dual-CCT bar produce every white-light setting?
Each variant has two specified white-light channels. Intermediate blending needs a compatible controller that supports channel mixing; it is not a feature of every switch.
Before ordering
These are internal sources, not finished displays. Verify DC24V power and wiring. The dual-CCT bar excludes driver, switch and controller. For the stone panel, check the selected accessory bundle; the 48W tunable version needs compatible CCT control. Cut only on the marked 20×20mm grid.
Send the material type, thickness or graphic sample, illuminated dimensions, cavity depth and desired white-light control through our contact page for a source review.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.