Looking for RANZCP Congress lightbox LED modules? A display supplier documents recruitment-booth lightboxes at this congress. Compare independent internal sources for your own printed fabric display.
Will brighter LEDs make my recruitment message easier to read?
Higher output alone does not prove readability. Test the actual printed lettering with the chosen source and frame; inspect bright patches and lost letter detail from the intended viewing distance.
Which LED bars should I compare for a text-led fabric lightbox?
Start with frame depth, mounting space and the intended edge-lit or rear-backlight layout. Compare the assembled printed message under the intended indoor lighting; select by the finished display, not lumens alone.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Are these medical or diagnostic lightbox lamps?
This page concerns printed exhibition branding. No clinical, treatment or diagnostic suitability is claimed. Verify each component for your independently designed display.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send the recruitment graphic, frame section and viewing distance through Contact us to compare sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Looking for RANZCP Congress lightbox LED modules? A display supplier documents recruitment-booth lightboxes at this congress. Compare independent internal sources for your own printed fabric display.
Will brighter LEDs make my recruitment message easier to read?
Higher output alone does not prove readability. Test the actual printed lettering with the chosen source and frame; inspect bright patches and lost letter detail from the intended viewing distance.
Which LED bars should I compare for a text-led fabric lightbox?
Start with frame depth, mounting space and the intended edge-lit or rear-backlight layout. Compare the assembled printed message under the intended indoor lighting; select by the finished display, not lumens alone.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Are these medical or diagnostic lightbox lamps?
This page concerns printed exhibition branding. No clinical, treatment or diagnostic suitability is claimed. Verify each component for your independently designed display.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send the recruitment graphic, frame section and viewing distance through Contact us to compare sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.