Looking for Photography & Video Show backlit display LEDs? A lightbox supplier documents printed-graphic displays at the show. Compare internal modules to illuminate a printed image; choose the print and light source together.
Can ordinary photographic paper replace backlit lightbox media?
Do not assume an opaque paper print will transmit enough light. Ask the printer for media intended for backlighting and assess a sample in the intended box. Match graphic finishing to the frame.
How should I compare white LEDs for a printed photo lightbox?
View the actual printed sample with the candidate source in an assembled box. Compare colour appearance, visible light spots and uniformity across pale and dark areas. CRI alone does not guarantee print colour accuracy.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Are these LEDs studio lights or a photo-editing proofing system?
They are lightbox components for illuminating printed graphics. No studio-lighting, monitor calibration or colour-proofing certification is claimed. Select the specific model and test the finished display.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your backlit print material, frame depth and image area through Contact us to compare lightbox sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Looking for Photography & Video Show backlit display LEDs? A lightbox supplier documents printed-graphic displays at the show. Compare internal modules to illuminate a printed image; choose the print and light source together.
Can ordinary photographic paper replace backlit lightbox media?
Do not assume an opaque paper print will transmit enough light. Ask the printer for media intended for backlighting and assess a sample in the intended box. Match graphic finishing to the frame.
How should I compare white LEDs for a printed photo lightbox?
View the actual printed sample with the candidate source in an assembled box. Compare colour appearance, visible light spots and uniformity across pale and dark areas. CRI alone does not guarantee print colour accuracy.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Are these LEDs studio lights or a photo-editing proofing system?
They are lightbox components for illuminating printed graphics. No studio-lighting, monitor calibration or colour-proofing certification is claimed. Select the specific model and test the finished display.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your backlit print material, frame depth and image area through Contact us to compare lightbox sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.