Preparing a printed lightbox backwall for an inline supplier exhibit at The NGA Show? Compare internal LED sources around your grocery-product or retail-technology demonstration. Browse all 26 Modules products below.
Will visitors see the message behind the demonstration counter?
Check the artwork from the aisle with counters, samples and monitors in place. Test small text, pale packaging images and dark brand areas in the illuminated frame. Reposition obstructions before choosing more LED power.
How can one inline wall support changing supplier graphics?
Use the actual fabric or printed panel when comparing edge lighting and direct rear backlighting. Record the approved white tone and graphic-to-LED spacing. Test access for graphic changes and power disconnection with the counter in its normal position.
Compare LED lightbox sources
- 12W dual-CCT rear-backlighting bar: DC24V, 1320lm, 180° optics and 3-wire JST. Select the required two-white-tone variant.
- 10W slim edge-lit bar: DC24V, 360×23×16mm including lens, 1100lm, 9°×50° optics.
- 7W compact edge-lit bar: DC24V, 200×23×16mm, 770lm; standard 20°×60° optics.
Can these LEDs replace grocery-case lights or food-display equipment?
This selection serves compatible exhibition graphic lightboxes. It does not establish suitability for refrigerated cases, food-contact environments or retail-screen hardware. Check the chosen model and the separate requirements of your demonstration equipment.
Before ordering
Featured bars use separate DC24V constant-voltage supplies. The dual-CCT model needs a separate compatible 3-wire controller. Only the featured 10W slim model lists up to six compatible bars per run, subject to cable and load checks. Verify pinout and polarity for every selected model.
Send the inline layout, counter height, frame depth and printed samples for a test configuration and quotation.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Preparing a printed lightbox backwall for an inline supplier exhibit at The NGA Show? Compare internal LED sources around your grocery-product or retail-technology demonstration. Browse all 26 Modules products below.
Will visitors see the message behind the demonstration counter?
Check the artwork from the aisle with counters, samples and monitors in place. Test small text, pale packaging images and dark brand areas in the illuminated frame. Reposition obstructions before choosing more LED power.
How can one inline wall support changing supplier graphics?
Use the actual fabric or printed panel when comparing edge lighting and direct rear backlighting. Record the approved white tone and graphic-to-LED spacing. Test access for graphic changes and power disconnection with the counter in its normal position.
Compare LED lightbox sources
- 12W dual-CCT rear-backlighting bar: DC24V, 1320lm, 180° optics and 3-wire JST. Select the required two-white-tone variant.
- 10W slim edge-lit bar: DC24V, 360×23×16mm including lens, 1100lm, 9°×50° optics.
- 7W compact edge-lit bar: DC24V, 200×23×16mm, 770lm; standard 20°×60° optics.
Can these LEDs replace grocery-case lights or food-display equipment?
This selection serves compatible exhibition graphic lightboxes. It does not establish suitability for refrigerated cases, food-contact environments or retail-screen hardware. Check the chosen model and the separate requirements of your demonstration equipment.
Before ordering
Featured bars use separate DC24V constant-voltage supplies. The dual-CCT model needs a separate compatible 3-wire controller. Only the featured 10W slim model lists up to six compatible bars per run, subject to cable and load checks. Verify pinout and polarity for every selected model.
Send the inline layout, counter height, frame depth and printed samples for a test configuration and quotation.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.