Looking for NeoCon fabric lightbox LED modules or LED bars for commercial interior exhibition graphics? Compare internal sources for printed lightboxes viewed through decorative acoustic beams.
Which LEDs suit interior fabric lightboxes?
Compare edge-lit and rear-backlight layouts using the actual print, fabric and usable depth. Check the intended visible graphic areas with the decorative front in place.
How do front beams affect the visible graphic?
View the assembled display from different approach angles. Separate shadows inside the lightbox from areas hidden by front beams; more internal light cannot reveal an obstructed graphic.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What lightbox and front details should I send?
Send face dimensions, printed artwork, frame sections, beam positions, mounting space and supply details. Check access for graphic changes and wiring; these LEDs do not provide acoustic treatment.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your fabric lightbox sections and decorative-front layout to compare suitable sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Looking for NeoCon fabric lightbox LED modules or LED bars for commercial interior exhibition graphics? Compare internal sources for printed lightboxes viewed through decorative acoustic beams.
Which LEDs suit interior fabric lightboxes?
Compare edge-lit and rear-backlight layouts using the actual print, fabric and usable depth. Check the intended visible graphic areas with the decorative front in place.
How do front beams affect the visible graphic?
View the assembled display from different approach angles. Separate shadows inside the lightbox from areas hidden by front beams; more internal light cannot reveal an obstructed graphic.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What lightbox and front details should I send?
Send face dimensions, printed artwork, frame sections, beam positions, mounting space and supply details. Check access for graphic changes and wiring; these LEDs do not provide acoustic treatment.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your fabric lightbox sections and decorative-front layout to compare suitable sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.